针对传统牺牲阳极由于电位过负导致高强钢氢脆敏感性增加的问题,以Ga为主要活化元素,加入Zn和Si改善阳极的溶解性能,研制了具有良好电化学性能的低驱动电位铝合金牺牲阳极材料,并验证了其对高强钢的保护效果,评价了其对高强钢氢脆敏感性的影响.
参考文献
[1] | Reding J T;Newport J J .The influence of alloying elements on aluminum anode in sea water[J].Materials Protection,1966,5(12):15-18. |
[2] | Gurrappa I .Aluminum alloys for cathodic protection[J].Corrosion Prevention & Control,1997,44(03):69-80. |
[3] | 齐公台,郭稚弧,林汉同,魏伯康.腐蚀保护常用的几种牺牲阳极材料[J].材料开发与应用,2001(01):36-40. |
[4] | 马丽杰,宋曰海,郭忠诚,樊爱民.Al-Zn-In-Cd牺牲阳极材料的电化学性能研究[J].材料开发与应用,2004(01):32-34. |
[5] | 余波,孙明先,闫永贵,马力.镁含量对Al-Zn-In-Mg-Ti-Ga-Mn合金牺牲阳极组织和性能的影响[J].材料开发与应用,2012(03):56-59. |
[6] | Billingham J;ShaRp J V.Review of the performance of high strength steels used offshore[M].HSE Books,Sulffolk UK,2003:111-118. |
[7] | Batt C L;Robinson M J .Cathodic protection requirements for high strength steel[J].British Corrosion Journal,2002,37(01):31-36. |
[8] | Nustad G;Tone S;Per O G.Resistor controlled cathodic protection for stainless steel in chlorinated seawater[A].NACE,TX,Houston,2003 |
[9] | 邓永生.铁阳极在海水介质中的性能及应用[C].第四届全国腐蚀大会论文集,2003:92-94. |
[10] | Pautasso J P;Guyader H L;Debout V.Low voltage cathodic protection for high strength steels:Part 1-Definition of a new aluminum galvanic anode material[A].NACE,TX,Houston,1998 |
[11] | Lemieux E;Keith E;Lucas E A .Performance evaluation of low voltage anodes for cathodic protection[J].CORROSION,2002,58(01):16-27. |
[12] | 马力,李威力,曾红杰,闫永贵,侯保荣.低驱动电位Al-Ga合金牺牲阳极及其活化机制[J].中国腐蚀与防护学报,2010(04):329-332. |
[13] | 谭文志,杜元龙.阴极保护导致ZC-120钢在海水中环境氢脆[J].材料保护,1988(03):10. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%