On the basis of the existing originally modified calculation models of theoretical combustion temperature(TCT),some factors,such as the combustion ratio of pulverized coal injection(PCI),the decomposition heat of PCI and the heat consumption of SiO2 in ash reduced in high temperature environment,were amended and improved to put forward a more comprehensive model for calculating TCT.The influences of each improvement on TCT were studied and the results were analyzed compared with those of traditional model and originally modified model,which showed that the present model could reflect the thermal state of a hearth more effectively.
参考文献
[1] | 吴胜利,余晓波,陈辉,徐健,王筱留.高炉理论燃烧温度的计算[J].北京科技大学学报,2008(12):1432-1438. |
[2] | 吴胜利,陈辉,余晓波,徐健,王筱留.高炉理论燃烧温度计算的研究[J].钢铁,2008(09):16-19. |
[3] | Ohno Y;Furukawa T;Matsu U M .Combustion Behavior of Pulverized Coal in a Raceway Cavity of Blast Furnace and Its Application to a Large Amount Injection[J].ISIJ International,1994,34(08):641. |
[4] | 张建良,杨天钧,高征铠,高斌,张宗旺,王丽华.高炉喷煤过程煤粉分解热确定的新方法[J].北京科技大学学报,2001(04):308-310. |
[5] | Smoot D L;Smith J P.Coal Combustion and Gasification[M].New York:Plenum Press,1985 |
[6] | JIN Yan-juan.Technology on Pulverized Coal Injection Into Blast Furnace[M].北京:冶金工业出版社,2005 |
[7] | FU Wei-biao.Combustion Theory of Coal and Its Macroscopic and General Rules[M].北京:清华大学出版社,2003 |
[8] | Zelkowski J;YUAN Jun-lu;ZHANG Pei-fangh.Theory and Technology on Coal Combustion[M].上海:华东理工大学出版社,1990 |
[9] | ZHOU Chuan-dian.Technologic Handbook of Iron-Making in Blast Furnace[M].北京:冶金工业出版社,2002 |
[10] | ZHANG Qian-xiang;FAN Xin-jie;QIN Song et al.Study on Silicon Transfer in the Form of SiO Vapour to Molten Iron[J].Iron & Steel,1988,23(08):6. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%