用一次包埋法制备了C/C复合材料SiC-MoSi2-TiSi2复相陶瓷内涂层,对制备涂层的影响因素进行了分析。最终确定的制备条件为制备温度2573K,保温时间为2h,MoSi2和TiC的配比为5∶2。结果表明C/C复合材料表面SiC-MoSi2-TiSi2复相陶瓷涂层在1500℃有氧环境下氧化49h,失重仅仅2.18%,失重率为1.17×10-4g/（cm2.h）,具有良好的抗氧化性能。
The internal SiC-MoSi2-TiSi2 coating for C/C composites made by pack cementation was studied.The influencing factor was analyzed when the coating was made.It is discovered that the optimum temperature was 2573K,the prepared time was 2h and the mixture ratio of MoSi2 and TiC was 5∶2.Oxidation test shows that the weight loss of the SiC-MoSi2-TiSi2 coated C/C composites characterized by excellent thermal shock resistance is only 2.18%（the weight loss rate is 1.17×10-4g/（cm2·h）） at 1773K for 49h.
参考文献
| [1] | 李贺军,薛晖,付前刚,张雨雷,史小红,李克智.C/C复合材料高温抗氧化涂层的研究现状与展望[J].无机材料学报,2010(04):337-343. |
| [2] | 黄剑锋,李贺军,熊信柏,曾燮榕,李克智,付业伟,黄敏.炭/炭复合材料高温抗氧化涂层的研究进展[J].新型炭材料,2005(04):373-379. |
| [3] | 焦更生,李贺军,李克智,王闯,魏剑.包埋法制备碳/碳复合材料碳化硅涂层缺陷的形成机制及控制[J].硅酸盐学报,2007(06):721-724. |
| [4] | 曾燮榕,杨峥,李贺军.防止C/C复合材料氧化的MoSi2/SiC双相涂层系统的研究[J].航空学报,1997(04):427. |
| [5] | 曾燮榕,李贺军,杨峥.碳/碳复合材料表面MoSi2-SiC复相陶瓷涂层及其抗氧化机制[J].硅酸盐学报,1999(01):8-15. |
| [6] | 孙岚,潘金生,清华大学,北京.TiC颗粒增韧MoSi2基复合材料的力学性能[J].材料工程,2001(09):31-34. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%