用扫描隧道显微镜（STM）观察了Fe-0．37C（质量分数，％）合金中魏氏组织铁素体的表面浮突，发现其浮突形状为帐篷型和复杂形态.切变机制不能解释魏氏组织表面浮突的形成过程，而扩散控制的台阶机制可合理地解释.魏氏组织的浮突高度为70—450nm，最大形状变形约0．36.
Surface relief accompanying Widmanstatten ferrite formation in an Fe-0.37Calloy was investigated by scanning tunneling microscopy (STM). It was discovered that the surface relief due to Widmanstatten ferrite formation appears to be of tent-shaped type, or complex type.The evolution of surface relief of Widmanstatten ferrite can be more interpreted by ledgewisegrowth mechanism rather than by displacive mechanism. The height of relief is 70-450 nm, and the maximum shape deformation is ca. 0.36.
参考文献
| [1] | |
| [2] | |
| [3] | |
| [4] | |
| [5] | |
| [6] | |
| [7] | |
| [8] | |
| [9] | |
| [10] | |
| [11] | |
| [12] | |
| [13] | |
| [14] |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%