以添加不同Mn含量的Al-4.6Cu-Mn合金为对象,利用FE-SEM、VNT Quant Lab-MG专业定量金相分析系统软件研究了不同冷却速率下Al-4.6Cu-Mn合金的二次枝晶间距、非平衡共晶相体积分数以及微观凝周组织形貌特征.结果表明:冷却速率在540～10°K·s-1范围时,随着冷却速率的提高,A1-4.6Cu-Mn合金非平衡共晶相体积分数随之降低,二次枝晶间距减小,非平衡共晶相形态细化;当Mn含量增加时,Al-4.6Cu-Mn合金中非平衡共晶相体积分数随之增大.
参考文献
| [1] | 田荣璋.铸造铝合金[M].长沙:中南大学出版社,2006 |
| [2] | 张国清.合金元索对铝铜合金性能的影响[J].有色金属与稀土应用,2007(02):1-3. |
| [3] | SUYITNO;D.G. ESKIN;V.I. SAVRAN .Effects of Alloy Composition and Casting Speed on Structure Formation and Hot Tearing during Direct-Chill Casting of Al-Cu Alloys[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2004(11):3551-3561. |
| [4] | Eskin D G;Du Q;Buvalcaba D et al.Experimental study of structure brmafion in binary Al-Cu alloys at different cooling rates[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2005,405:1-10. |
| [5] | Du Q;Eskin DG;Jacot A;Katgerman L .Two-dimensional modelling and experimental study on microsegregation during solidification of an Al-Cu binary alloy[J].Acta materialia,2007(5):1523-1532. |
| [6] | Eskin D G;Zuidema J;Savran V I et al.Structure formation and microsegregation under different process conditions during DC casting[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,384(1-2):232-244. |
| [7] | Berkdemir, A.;Gunduz, M. .Effect of growth rate and Mg content on dendrite tip characteristics of Al-Cu-Mg ternary alloys[J].Applied physics, A. Materials science & processing,2009(4):873-886. |
| [8] | Flemings M C.Solidification Processing[M].New York:McGraw-Hill,1974 |
| [9] | Fornaro, Osvaldo;Palacio, Hugo A. .Study of dilute Al-Cu solidification by cooling curve analysis[J].Journal of Materials Science,2009(16):4342-4347. |
| [10] | 高强.最新有色金属金相图谱大全[M].北京:冶金工业出版社,2005 |
| [11] | Beiov N A;Eskin D G;Aksenov A.Multicomponent Phase Diagrams:Applications for Commercial Aluminum alloys[M].UK:Elsevier Science Ltd,2005 |
| [12] | 胡德林;张帆.三元合金相图[M].西安:西北工业大学出版社,1995 |
| [13] | 胡汉起.金属凝固原理[M].北京:机械工业出版社,2007 |
| [14] | 刘智恩.材料科学基础[M].西安:西北工业大学出版社,2007 |
| [15] | 周尧和;胡壮麒;介万奇.凝固技术[M].北京:机械工业出版社,1998 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%