为深入了解模具温度对快速热循环注塑成型制品复原性的影响,以自主开发的车用蓝牙高光模具和成型温控辅助装置为基础,研究了快速热循环注塑成型模具温度对制品复原性的影响,并分析了不同模具温度条件下其他参数对制品复原性的影响及相同品质条件下各参数随模具温度的变化规律.结果表明,当模具温度升至塑料热变形温度附近时,复制率明显提高;在相同模具温度条件下,压力和温度对制品复制率的影响较明显,时间对制品复制率的影响甚微;随着模具温度逐步升高,在熔体温度、注射压力不变条件下,制品复制率呈小幅升高趋势,对于保压压力、保压时间和冷却时间则呈"V"字型小幅波动变化.
参考文献
| [1] | 刘东雷,辛勇.RHCM成型制品高光面形成微观机理研究[J].中国塑料,2008(07):71-74. |
| [2] | Ming-Ching Yu;Wen-Bin Young;Pe-Ming Hsu .Micro-injection molding with the infrared assisted mold heating system[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(0):288-295. |
| [3] | B. Sha;S. Dimov;C. Griffiths;M. S. Packianather .Investigation of micro-injection moulding: Factors affecting the replication quality[J].Journal of Materials Processing Technology,2007(2/3):284-296. |
| [4] | B.-K. Lee;D. S. Kim;T. H. Kwon .Replication of microlens arrays by injection molding[J].Microsystem technologies,2004(6/7):531-535. |
| [5] | Yang Y;Gao FR .Injection molding product weight: Online prediction and control based on a nonlinear principal component regression model[J].Polymer engineering and science,2006(4):540-548. |
| [6] | P. Postawa;J. Koszkul .Change in injection moulded parts shrinkage and weight as a function of processing conditions[J].Journal of Materials Processing Technology,2005(0):109-115. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%