Al alloy matrix composites reinforced with copper-coated graphite particle have been prepared by melt stirring process in this work. The effect of the addition of Mg on distribution of the graphite particles has been investigated. Scanning electron microscopy (SEM) was used to observe the micro-morphology of Al alloy matrix composites reinforced with graphite particles. Meanwhile, the content of graphite was analyzed in the different position of casting by dissolution method and the mechanical properties of the composites were detected. The results show that the content of graphite increase with increasing Mg content; the graphite particles distribute uniformly in the particle reinforced metal matrix composites (PMMC) with 0.6 wt pct Mg; however, the agglomeration of the graphite particles is observed obviously in the matrix when Mg content is more than 1.0 wt pct. In addition, the proper Mg addition amount is beneficial to enhance the mechanical properties of the graphite particles reinforced Al alloy matrix composites and the abrasion resistance of the materials due to a reduce friction coefficient.
参考文献
| [1] | |
| [2] | Y.B. Liu, P.K. Rohatgi and S. Ray: Metall. Trans. A, 1993, 24, 151. [2]C.B. Lin, R.J. Chang and W.P. Weng: Wear, 1998, 17, 167.[3] A.R. Riahi and A.T. Alpas: Wear, 2001, 251, 1396.[4] H.S. Chu, K.S. Liu and J.W. Yeh: Mater. Sci. Eng. A, 2000, 277, 25.[5] J.N. Wei, H.F. Cheng, Y.F. Zhang, F.S. Han, Z.C. Zhou and J.P. Shui: Mater. Sci. Eng. A, 2002, 325, 444.[6] J.B. Yang, C.B. Lin, T.C. Wang and H.Y. Chu: Wear, 2004, 257, 941.[7] J. Hashim, L. Looney and M.S.J. Hashmi: J. Mater. Process. Technol, 1999, 93, 1.[8]S.C. Lim, M. Gupta and W.B. Ng: Mater. Design, 1997, 18(3), 161.[9] K. Aldas, M.D. Mat: J. Mater. Process. Technol, 2005, 160, 289.[10]S.W. Ip, R. Sridhar, J.M. Toguri, T.F. Stephenson and A.E.M. Warner: Mater. Sci. Eng. A, 1998, 224, 31.[11] T.P.D. Rajan, R.M. Pillai and B.C. Pai: J. Mater. Sci, 1998, 33, 3491.[12] A. Contreras, E. Bedolla and R. Perez: Acta Mater, 2004, 52, 985.[13] K. Landry, S. Kalogeropoulou and N. Eustathopoulos: Mater. Sci. Eng. A, 1998, 254, 99.[14]M.D. Skibo and D.M. Schuster: Process for Production of Metal Matrix Composites by Casting and Composite Therefrom, U.S. Patent, No. 4,759,995, 1988.[15]M.D. Skibo and D.M. Schuster: Process for Preparation of Composite Materials Containing Nonmetallic Particles in a Metallic Matrix, and Composite Materials Made Thereby, U.S. Patent, No. 4,786,467, 1988.[16] J. Hashim, L. Looney, M.S.J. Hashmi: J. Mater. Process. Technol, 2002, 123, 251.[17] J. Hashim, L. Looney and M.S.J. Hashmi: J. Mater. Process. Technol, 2001, 119, 329.[18]K. Komuro, M. Suwa, K. Soeno and M. Ohsawa: Process for Preparation of Graphite-containing Aluminum Alloys, U.S. Patent, No. 4,383,970, 1983.[19]T.J. Luo, G.C. Yao, L.L. Wu, Y.H. Liu and B.H. Han: Chin. J. Nonferrous Metal., 2007, 17(1), 80. (in Chinese)[20]M.H. Sun, H.R. Geng, X.F. Bian and Y. Liu: Acta Metall. Sin., 2000, 36(11), 1134. (in Chinese)[21]X.F. Bian, W.M. Wang, H. Li and J.J. Ma: Metal Melt Structure, Shanghai Jiao Tong University Press, Shanghai, 2003, 54. (in Chinese)[22]S.S. Wu: Principle of Transfer in Materials Processing Metallurgy, China Machine Press, Beijing, 2001, 74. (in Chinese)[23]T. Iida and R.I.L. Guthrie: The Physical Properties of Liquid Metals, translated by A.P. Xian, Science Press, Beijing, 2006, 206. (in Chinese)[24]N. Harnby, M.F. Edwards and A.W. Nierow: Mixing in the Process Industries, translated by Z.Q. Yu, China Petrochemical Press, Beijing, 1991, 6. (in Chinese)[25]Z.T. Wang and R.Z. Tian: Manual Processing of Aluminum Alloy, Central South University Press, Changsha, 2000, 222. (in Chinese)[26] J.J. Lewandowski, C. Liu and W.H. Hunt Jr: Mater. Sci. Eng. A, 1989, 107, 241.[27]T.C. Tszeng: Compos. Part B-Eng., 1998, 29(3), 299. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%