反应性温度系数是脉冲堆重要参数之一,采用一种特殊的方法测量了脉冲状态反应性温度系数。把脉冲的全过程分为峰和坪两个过程,根据Fuchs-Hansen模型知道脉冲峰过程的反应性减小量为系统初始超瞬发反应性的2倍,采用脉冲波形去坪的方法分离出峰过程贡献的温升,由此得到CFBR-Ⅱ堆的脉冲反应性温度系数αT=-0.002 02＄/K。
Reactivity temperature coefficient is one of important parameters of burst reactor. The methods of measuring the coefficient were introduced and analyzed. The whole process of burst is split into ＂peak＂ process and ＂tail＂ process. Reactivity reduction is twice as large as initial excess reactivity in ＂peak＂ process from Fuchs-Hansen model. Increment of temperature induced by ＂peak＂ process was got through removing ＂tail＂. So we deduced reactivity temperature coefficient of CFBR- Ⅱ aT =-0. 002 02 $/K.
参考文献
| [1] | 杨成德,龚书良.核物理动态,1995,12(4):58. |
| [2] | WIMETT T F.Dynamics of Annular Fuel in Fast Burst Re-actor//1987 Report SAND87-0098,Sandia National Labs.1987,1:19-33. |
| [3] | 赵小林,范晓强.核动力工程,2008,29(5):29. |
| [4] | SHABALIN E P.Fast Pulsed and Burst Reactors.NewYork:Pergamon Press.1979,13-41. |
| [5] | WIMETT T F,WHITE R H.Nucl Sci Eng,1960,8:691. |
| [6] | 刘晓波,范晓强,蒋勇,等.核动力工程,2007,28(增刊):30. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%