镍基合金具有优良的性能而获得广泛的应用,针对切削加工中存在的问题,采用与材料的力学性能无关的电火花进行加工,通过对其电火花加工实验,初步研究了峰值电流和脉冲宽度加工参数对加工表面完整性的影响规律。结果表明,表面粗糙度随峰值电流和脉冲宽度的增大而增大,与电极丝的运动方向无关。加工表面由微观组织规则的凹坑、熔滴和微小孔组成,加工表面无微观裂纹存在。显微硬度变化不大,无加工硬化现象。随脉冲能量减小,重铸现象减轻,加工表面完整性越好。
Nickel based super alloys are widely used in many areas because of its excellent performance.According to its turning problem,electrical discharge machining method is utilized in this paper to explore it machining surface intetrity.Experiments are carried out primarilly.The influence of pulse current and pulse on time on surface integrity is analyzed.Results show that surface roughness increases with the pulse current and pulse on time.The movement direction of has no effect on surface roughness.The SEM figures are characterized by discharge craters,droplets,micro-voids and debris.There is no micro cracks on the machined surface.The value of microhardness changes little.Low discharge energy results in small recast layer and good surface integrity.
参考文献
| [1] | Hung-Sung Liu;Biing-Hwa Yan;Fuang-Yuan Huang .A study on the characterization of high nickel alloy micro-holes using micro-EDM and their applications[J].Journal of Materials Processing Technology,2005(3):418-426. |
| [2] | Jia Hongsheng;Ma Hongan;WangLianru et al.Research on interracial characteristic of PDC prepared using nickel based alloy[J].Journal of Functional Materials,2010,41:1879-1882. |
| [3] | R. S. Pawade;Suhas S. Joshi;P. K. Brahmankar;M. Rahman .An investigation of cutting forces and surface damage in high-speed turning of Inconel 718[J].Journal of Materials Processing Technology,2007(0):139-146. |
| [4] | Newton T R.Investigation of the effect of process param-eters on the formation and characteristics of recast layer in wire-EDM of Inconel 718[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2009(513-514):208215. |
| [5] | Durul Ulutan;Tugrul Ozel .Machining induced surface integrity in titanium and nickel alloys: A review[J].International Journal of Machine Tools & Manufacture: Design, research and application,2011(3):250-280. |
| [6] | Y. B. Guo;A. W. Warren;F. Hashimoto .The basic relationships between residual stress, white layer, and fatigue life of hard turned and ground surfaces in rolling contact[J].CIRP Journal of Manufacturing Science and Technology,2010(2):129-134. |
| [7] | Fu Xiuzhuo;Zhang Qinhe;Bao Guanghua et al.MRR a-nalysis on technology of piezoelectric self-adaptive micro-EDM[J].Procedia Engineering,2011,16:477-485. |
| [8] | Jayakumar Narasimhan;Zuyuan Yu;Kamlakar P. Rajurkar .Tool Wear Compensation and Path Generation in Micro and Macro EDM[J].Journal of manufacturing processes,2005(1):75-82. |
| [9] | 杨振朝,张定华,姚倡锋,任军学,田卫军.高速铣削速度对TC4钛合金表面完整性影响机理[J].南京航空航天大学学报,2009(05):644-648. |
| [10] | 王贵成,洪泉,朱云明,裴宏杰.精密加工中表面完整性的综合评价[J].兵工学报,2005(06):820-824. |
| [11] | Lauwers B;Kruth J P;Liu W .Investigation of material removal mechanisms in EDM of composite ceramic ma-terial[J].Journal of Materials Processing Technology,2004,149(1-3):347-352. |
| [12] | H. T. Lee;T. Y. Tai .Relationship between EDM parameters and surface crack formation[J].Journal of Materials Processing Technology,2003(3):676-683. |
| [13] | Aspinwall D K;Soo S L;Berrisford A E et al.Work piece surface roughness and integrity after WEDM of Ti 6AI-4V and Inconel 718 using minimum damage genera tor teehnology[J].CIRP Annals-Manufacturing Tech nology,2008,57:187-190. |
| [14] | Guu, YH;Hou, MTK .Effect of machining parameters on surface textures in EDM of Fe-Mn-Al alloy[J].Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing,2007(1-2):61-67. |
| [15] | Guo Y B;Li W;Jawahir I S .Surface integrity charac-terization and prediction in machining of hardened and difficult-to-machine alloys:a state of the art research re-view and analysis[J].Machining Science and Technolo gy,2009,13:437-470. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%