欢迎登录材料期刊网

材料期刊网

高级检索

通过采用角度抛光和逐层抛光法以及择优化学腐蚀,对基于超声辅助磨削的KDP晶体试件进行亚表面损伤形式观察以及损伤深度检测,以便为后续加工提供指导.损伤检测实验表明:在超声辅助磨削工艺条件下,亚表面损伤以与磨粒运动方向平行的中位裂纹为主,且裂纹间距具有一定的规律性;亚表面损伤深度为19~48 μm,磨头形状(有无倒角)较之磨头磨粒粒度对亚表面损伤深度具有更大的影响,使用有倒角的磨头可得最小亚表面损伤.

参考文献

[1] Bespalov V I;Bredikhin V I;Ershov V P et al.Gained Experience in Production of Wide-aperture Optical Elements Using KDP,DKDP Crystals Rapid Growth Technology[J].Proceedings of SPIE,2001,4424:124-128.
[2] Hawley-Fedder R;Geraghty P;Locke S et al.NIF Pockels Cell and Frequency Conversion Crystals[J].Proceedings of Spie,2004,5341(01):121-126.
[3] Kalman P;Juhasz T .Doubled Electro-optic Light Shutter[J].Journal of Physics E:Scientific Instruments,1986,19(11):932-933.
[4] 杨力.先进光学制造技术[M].北京:科学出版社,2001
[5] 王奔,吴东江,高航,康仁科.清洗方法对KDP晶体抛光表面质量的影响[J].人工晶体学报,2009(02):525-528,534.
[6] Kozlowski M R;Thomas I;Edwards G et al.Influence of Diamond Turning and Surface Cleaning Processes on the Degradation of KDP Crystal Surfaces[J].Proceedings of Spie,1991,1561:59-69.
[7] 吴东江,曹先锁,王强国,王奔,高航,康仁科.KDP晶体加工表面的亚表面损伤检测与分析[J].光学精密工程,2007(11):1721-1726.
[8] Wu D J;Wang B;Gao H et al.Influence of Grinding to the Surface and Subsurface Quality of KDP Crystal[J].Current Advances in Materials and Processes,2008,53-54:203-208.
[9] Z. J. Pei;D. Prabhakar;P. M. Ferreira;M. Haselkorn .A mechanistic approach to the prediction of material removal rates in rotary ultrasonic machining[J].Journal of manufacturing science and engineering,1995(2):142-151.
[10] Qiangguo Wang;Z. J. Pei;Hang Gao;N. J. Churi;Renke Kang .Rotary Ultrasonic Machining of Potassium Dihydrogen Phosphate (KDP) crystal: an experimental investigation[J].International Journal of Mechatronics and Manufacturing Systems,2009(4):414-426.
[11] 张银霞 .单晶硅片超精密磨削加工表面层损伤的研究[D].大连理工大学,2006.
[12] Kailer A.;Nickel KG.;Gogotsi YG. .PHASE TRANSFORMATIONS OF SILICON CAUSED BY CONTACT LOADING[J].Journal of Applied Physics,1997(7):3057-3063.
[13] Qiangguo Wang;Hang Gao;Quanzhong Zhang;Xiansuo Cao;Renke Kang .Experimental Researches on Precision Grinding of KDP Crystal[J].Key engineering materials,2008(359/360):113-117.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%