本文阐述了涂层与基体之间的界面结合机理及类型,介绍了基体预处理、设计界面过渡层和热处理等改善Al2O3膜与钢基体界面结合性能方面的研究成果,指出在膜层缺陷、残余应力及界面结合强度检测评价等方面研究的不足,为今后钢基/Al2O3陶瓷膜的制备及性能研究提供依据.
参考文献
| [1] | 尹衍生;张景德.氧化铝陶瓷及其复合材料[M].北京:化学工业出版社,2001:7-12. |
| [2] | 王福贞;马文存.气相沉积应用技术[M].北京:机械工业出版社,2007:42-46. |
| [3] | V. Edlmayr;M. Moser;C. Walter;C. Mitterer .Thermal stability of sputtered Al2O3 coatings[J].Surface & Coatings Technology,2010(9/10):1576-1581. |
| [4] | Sarafoglou CI;Pantelis DI;Beauvais S;Jeandin M .Study of Al2O3 coatings on AISI 316 stainless steel obtained by controlled atmosphere plasma spraying (CAPS)[J].Surface & Coatings Technology,2007(1):155-161. |
| [5] | Jingde Zhang;Kangning Sun;Jiangting Wang;Baoyan Tian;Hongsheng Wang;Yansheng Yin .Sliding wear behavior of plasma sprayed Fe_3Al-Al_2O_3 graded coatings[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2008(16):5681-5685. |
| [6] | J. Masalski;J. Gluszek;J. Zabrzeski;M. Nitsch;P. Gluszek .Improvement in corrosion resistance of the 3161 stainless steel by means of Al_2O_3 coatings deposited by the sol-gel method[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,1999(12):186-190. |
| [7] | 马壮,谷琳,李智超.热化学反应法制备Al_2O_3基陶瓷涂层及耐磨性能研究[J].热加工工艺,2010(06):83-85. |
| [8] | 刘福田,黄巍玲,李文虎,张英才,李兆前.金属陶瓷覆层-钢基体界面结合状态的研究[J].材料科学与工艺,2005(05):452-455. |
| [9] | 杨班权,陈光南,张坤,罗耕星,肖京华.涂层/基体材料界面结合强度测量方法的现状与展望[J].力学进展,2007(01):67-79. |
| [10] | 宋贵宏;杜吴;何春林.硬质与超硬涂层:结构、性能、制备与表征[M].北京:化学工业出版社,2007:6-10. |
| [11] | 苏修梁,张欣宇.表面涂层与基体间的界面结合强度及其测定[J].电镀与环保,2004(02):6-11. |
| [12] | Celik E;Demirkran A S;Ave E .Effect of grit blasting of substrate on the corrosion behaviour of plasma-sprayed Al2O3 coatings[J].Surface and Coatings Technology,1999,116-119:1061-1064. |
| [13] | 邵红红,王季,王晓静,于春杭,顾冬青.提高钢基表面Al2O3薄膜结合力的研究[J].功能材料,2010(05):794-796,799. |
| [14] | 汤梅,李弢 |
| [15] | 银陈,陈长安,张鹏程.PECVD制备Al-Al2O3复合阻氢涂层的研究[J].表面技术,2008(03):41-43,48. |
| [16] | Dumitrescu L;Maury F .Al2O3 coatings on stainless steel from Al metal-organic chemical vapor deposition and thermal treatments[J].Surface and Coatings Technology,2000,125(1-3):419-423. |
| [17] | 王志,李宏林,史国普,俎全高.钢基Fe/Al2O3梯度复合材料组织性能研究[J].稀有金属材料与工程,2007(z1):629-631. |
| [18] | 雷阿利,李高宏,冯拉俊,董楠.等离子喷涂 Cu-Al2O3 梯度涂层的组织与耐磨性分析[J].焊接学报,2008(05):65-68. |
| [19] | 罗来马,俞佳,郦剑.溶胶-凝胶法45钢表面制备Al2O3陶瓷涂层及性能[J].材料热处理学报,2009(04):138-141. |
| [20] | 冯拉俊,惠博,梁天权.Al2O3梯度涂层的制备及性能研究[J].材料保护,2005(04):42-44. |
| [21] | 罗新华,花国然,居志兰.等离子喷涂氧化铝陶瓷涂层组织[J].南通大学学报（自然科学版）,2007(01):63-66. |
| [22] | Ikeda Y;Tosa M;Yoshihara K .Adherence of Al2O3 coating layers to steels:the detrimental effect of sulphur and the beneficial effect of rare earth metals[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1989,120(01):179-184. |
| [23] | Tosa M;Ikeda Y;Yoshihara K .Effect of surface precipitation of titanium carbide on adherence of alumina film on steels[J].THIN SOLID FILMS,1989,177(1-2):107-115. |
| [24] | 翟长生,巫瑞智,王海军,周世魁,孙宝德.HEPJet等离子喷涂Al2O3性能试验研究[J].材料工程,2004(12):47-50,55. |
| [25] | 陈传忠;王文中;张建新 等.45钢表面激光熔覆Al2O3陶瓷涂层的研究[J].金属学报,1999,35(09):989-994. |
| [26] | Taschner C;Ljungberg B;Endler I et al.Deposition of hard crystalline Al2O3 coatings by pulsed d.c PACVD[J].Surface and Coatings Technology,1999,116-119:891-897. |
| [27] | Díaz B;Harkonen E;Swiatowska J et al.Low temperature atomic layer deposition of Al2O3 thin coatings for corrosion protection of steel:surface and electrochemical analysis[J].Corrosion Science,2011,53(06):2168-2175. |
| [28] | 孔德军,张永康,冯爱新,鲁金忠.基于XRD的Al2O3纳米薄膜残余应力测试[J].仪器仪表学报,2006(12):1619-1622. |
| [29] | 严资林,黄群英,宋勇,郭智慧,吴宜灿.CLAM钢基体表面Al2O3功能梯度涂层残余应力模拟分析[J].核科学与工程,2008(04):289-294. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%