This paper discussed influences of flow rates of O2, C3H8, and compressed air on the melting degree of particles during HVOF (high velocity oxy-fuel) sprayed CoCrW coating. The O2 flow rate has the maximal effect on the melting of particles, the C3H8 flow rate has the second, and the compressed air flow rate has the minimal effect. The bond strength of the HVOF sprayed CoCrW coating is over 54 MPa. The porosity ratio of the HVOF sprayed CoCrW coating after optimization of gas flow rates is less than 2%. The average microhardness of the coating is up to HV0.1 545. The oxidation amount per unit area of the HVOF sprayed CoCrW coating increases with the holding time increasing at 800°C. In the same way,the oxidation amount of the coating increases as the temperature increases. Particularly, the oxidation of the coating drastically increases over 850°C.
参考文献
| [1] | Schwetzke R.Suitable and standardized evaluation and testing methods for the characterization of coating[A].Erding,1997 |
| [2] | Jacobs L;Hyland M;De Bonte M.Wear behavior of HVOF and HVAF sprayed WC-cermet coatings[A].Nice,1998:169. |
| [3] | Arsenault B;Immafigeon J.P;Parameswaran V.R;Hawthorne H.,Legoux J.G.Sluru and dry erosion of HVOF thermal sprayed coatings[A].Nice,1998:231. |
| [4] | Beczkowiak J;Fischer J;Keller H.,and Schwier G.Advanced carbides and borides for wear resistant coatings-powder and coating properties[A].Kobe,1995:1053. |
| [5] | Dvorak M;Browning J.A.Extending the Limits of HVOF[A].Kobe,1995:405. |
| [6] | Glen S P.Taguchi Methods[M].Addison-Wesley Publishing Company, INC,1993 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%