研究了热轧后超快冷工艺对Q390C钢组织与性能的影响.结果表明:超快冷后Q390C钢的组织为珠光体和铁素体,其屈服强度、抗拉强度和断后伸长率分别可达388 MPa、548 MPa和27.3％,-20℃的冲击功为47 J;超快冷工艺提高了Q390C钢的力学性能.
参考文献
| [1] | 杨慧智.工程材料及成形工艺基础[M].北京:机械工业出版社,2008 |
| [2] | Misra RDK;Nathani H;Hartmann JE;Siciliano F .Microstructural evolution in a new 770 MPa hot rolled Nb-Ti microalloyed steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):339-352. |
| [3] | Tanniru M;Shanmugam S;Misra RDK;Panda D;Jansto S .Microalloyed V-Nb-Ti and V steels - Part 1 - Stereological study of ferrite-pearlite microstructure and its relationship to toughness[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2005(2):159-164. |
| [4] | 赵培林,孙新军,汤化胜,段明波,雍岐龙.热轧高强带钢同卷强度波动原因探讨及分析[J].钢铁,2011(08):56-62. |
| [5] | 王国栋.以超快速冷却为核心的新一代TMCP技术[J].上海金属,2008(02):1-5. |
| [6] | 李凡,衣海龙,刘振宇,王国栋.超快冷工艺下工程机械用550MPa级钢的组织与性能[J].机械工程材料,2012(04):34-36. |
| [7] | R. Okamoto;J. Agren .A model for interphase precipitation based on finite interface solute drag theory[J].Acta materialia,2010(14):4791-4803. |
| [8] | Hung-Wei Yen;Po-Yu Chen;Ching-Yuan Huang .Interphase precipitation of nanometer-sized carbides in a titanium-molybdenum-bearing low-carbon steel[J].Acta materialia,2011(16):6264-6274. |
| [9] | 李凡,衣海龙,陈军平,刘振宇,王国栋.超快冷技术在鞍钢Q55o工程机械用钢生产中的应用[J].轧钢,2011(05):7-8,50. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%