为评估高强度钢板热冲压成形过程中的传热强度,本文根据实验采集的温度曲线,利用热平衡的数值积分形式得到了不同压强下随温度连续变化的换热系数,求解过程中通过等效热容的方式引入了马氏体相变的影响.结果表明,换热系数的大小不仅与压强相关,而且随着材料温度变化.最后求得的换热系数被带入Abaqus仿真计算,仿真结果能和实验数据较好的吻合,从而对实验及估算方法的有效性进行了验证.
参考文献
| [1] | Katsuyoshi Ikeuchi;Jun Yanagimoto .Valuation method for effects of hot stamping process parameters on product properties using hot forming simulator[J].Journal of Materials Processing Technology,2011(8):1441-1447. |
| [2] | Merklein M;Lechler J;St(o)hr T .Investigation on the thermal behavior of ultra high strength boron manganese steels within hot stamping[J].International Journal of Material Forming,2009,2(S):259-262. |
| [3] | Abdulhay B;Bourouga B;Dessain C et al.Experimental study of heat transfer in hot stamping process[J].International Journal of Material Forming,2009,2(z1):255-257. |
| [4] | Bakriab D;Bourouga B;Dessain C.Thermal contact resistance estimation:influence of the pressure contact and the coating layer during a hot forming process[A].,2011:1107-1112. |
| [5] | Salomonsson P;Oldenburg M.Investigation of heat transfer in the press hardening process[A].Lule(a),Verlag Wissenschaftliche Scripten,2009:15-17. |
| [6] | Li Huiping;Zhao Guoqun;Niu Shanting;Luan Yiguo .Inverse heat conduction analysis of quenching process using finite-element and optimization method[J].Finite elements in analysis & design,2006(12):1087-1096. |
| [7] | Bosettil P;Bruschi S;Stoehr T et al.Interlaboratory comparison for heat transfer coefficient identification in hot stamping of high strength steels[J].Int J Mater Form,2010,3(z1):817-820. |
| [8] | Beck J;Bleckwell B;Clair C.Inverse Heat Conduction[M].John Wiley and Sons,Inc,1985 |
| [9] | 郭志鹏,熊守美,曺尚铉,崔正吉.热传导反算模型的建立及其在求解界面热流过程中的应用[J].金属学报,2007(06):607-611. |
| [10] | Cooper M G;Mikic B B;Yovanovich M M .Thermal contact conductance[J].International Journal of Heat and Mass Transfer,1969,12(03):279-300. |
| [11] | Yovanovich M M;Fenech H.Thermal contact conductance of nominally flat rough surfaces in a vacuum environment Thermophysics and Temperature[A].,1966:773-794. |
| [12] | Bowden F P;Tabor D.The Friction and Lubrication of Solids[M].London,Oxford:Oxford University Press,1950 |
| [13] | Holman J P.Heat Transfer(ninth edition)[M].New York:McGraw-Hill,2002 |
| [14] | 孙天亮.不同凝固潜热处理方法对计算铸坯温度场影响的评估[J].冶金自动化,2004(z1):529-532. |
| [15] | Sj(o)str(o)m S .Calculation of quench stresses in steel[D].University of Link(o)ping,Link(o)ping,Sweden,1982. |
| [16] | Koistinen D P;Marburger R E .A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbone alloys and plain carbon steels[J].Acta Metallurgica,1959,7:59-60. |
| [17] | C. Fieberg;R. Kneer .Determination of thermal contact resistance from transient temperature measurements[J].International Journal of Heat and Mass Transfer,2008(5/6):1017-1023. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%