以超支化液态聚碳硅烷（LPCS）与固态聚碳硅烷（纯PCS）的共混物作先驱体,熔融纺丝;所得原丝再在热空气气氛中氧化交联,在高温氮气气氛中热裂解,得到碳化硅纤维。研究表明,15%（质量分数）LPCS的加入,可使纯PCS先驱体的纺丝温度,从285℃降低到225℃;纺丝性能和纤维表面质量明显提高;还可以提高氧化交联的效率,降低交联温度,从而减少纤维部分融并、粘结的弊端;虽然纤维的室温力学强度有所降低,但抗氧化性能提高,1400℃氧化交联后,力学性能几乎不变;而纯PCS的力学性能却降为原来的50%。
A highly branched liquid polycarbosilane （LPCS） was mixed with a solid polycarbosliane （PCS） to give a polymer blend. It was then melt-spun into precursor fibers, oxidation-curd in hot-air, and converted into silicon carbide fibers by pyrolysis under nitrogen. It was found that the addition of the LPCS resulted in a sig- nificant drop on the spinning temperature from 285℃ （solid PCS） to 225℃ （with 15% LPCS）, while the spin- ning ability and fiber＇s surface of the polymer blend was also markedly improved over the solid PCS. Further more, the LPCS enhanced the oxidation curing, reducing the curing temperature and hence the tendency for fi- ber partial melting and sticking. Although the strength of silicon carbide fibers decreased owing to the presence of the LPCS, the oxidation resistance was improved. The strength of fibers with LPCS maintained the same af- ter treatment in air in 1400℃, and the solid PCS fibers reduced to half the original.
参考文献
| [1] | 陈朝辉.先驱体结构陶瓷[M].长沙:国防科技大学出版社,2003:106. |
| [2] | Cooke T F .Inorganic fibers-a literature review[J].Journal of the American Ceramic Society,1991,74(12):2959-2978. |
| [3] | 冯春祥;范小林;宋永才 .21世纪高性能纤维的发展应用前景及其挑战(I)硅化物陶瓷纤维[J].高科技纤维与应用,1999,24(04):1-8. |
| [4] | Johnson D W;Evans A G;Goettler R W.Ceramic Fibers and Coatings:Advanced Materials for the Twenty-first Century[M].Washington,DC:National Academy Press,1998 |
| [5] | Coustumer P Le;Monthioux M;Oberlin A .Understand- ing niealon fibre[J].Journal of the European Ceramic Society,1993,11(02):95-103. |
| [6] | Masaki Narisawa;Akira Idesaki;Shuhei Kitano;Kiyohito Okamura;Masaki Sugimoto;Tadao Seguchi;Masayoshi Itoh .Use of blended precursors of poly(vinylsilane) in polycarbosilane for silicon carbide fiber synthesis with radiation curing[J].Journal of the American Ceramic Society,1999(4):1045-1051. |
| [7] | Idesaki A.;Okamura K.;Sugimoto M.;Morita Y.;Seguchi T. Itoh M.;Narisawa M. .Fine silicon carbide fibers synthesized from polycarbosilane-polyvinylsilane polymer blend using electron beam curing[J].Journal of Materials Science,2001(2):357-362. |
| [8] | Idesaki A.;Okamura K.;Sugimoto M.;Tanaka S.;Morita Y. Seguchi T.;Itoh M.;Narisawa M. .Fine SiC fiber synthesized from organosilicon polymers: relationship between spinning temperature and melt viscosity of precursor polymers[J].Journal of Materials Science,2001(23):5565-5569. |
| [9] | Yajima S;Hayashi J;Omori M .Continuous silicon car- bide fiber of high tensile strength[J].Chemistry Letters,1975,9:931-934. |
| [10] | Yajima S;Hayashi J;Omori M et al.Development of a silicon carbide fiber with high tensile strength[J].Nature,1976,261:683-685. |
| [11] | Yajima S;Okamura K;Hayashi J et al.Synthesis of continuous silicon carbide fibers with high tensile strength[J].Journal of the American Ceramic Society,1976,59:324-327. |
| [12] | Whitmarsh C K;Interrante L V .Synthesis and struc- ture of a highly branched polycarbosilane derived from (chloromethyl) trichlorosilane[J].Organometallics,1991,10:1336-1344. |
| [13] | 余兆菊,周聪,李然,詹俊英,何国梅,夏海平,丁马太.液态超支化聚碳硅烷的研究进展[J].功能材料,2010(07):1113-1116,1119. |
| [14] | n Suwardie H;Kalyon D M;Kovenklioglu S .Thermal behavior and curing kinetics of poly(carbosilane)[J].Journal of Applied Polymer Science,1991,42:1087-1095. |
| [15] | Narisawa M;Shimoda M;Okamura K et al.Reaction mechanism of the pyrolysis of polycarbosilane and poly- carbosilazane as ceramic precursors[J].Bulletin of the Chemical Society of Japan,1995,68:1098-1104. |
| [16] | Hasegawa Y;Okamura K .con carbide fiber, part 4:[J].Synthesis of continuous sili the structure of polycarbosi J Mater Sci,1986,21:321. |
| [17] | Silverstein R M;Bassler G C;Morrill T C.Spectrome- tric Identification of Organic Compounds[M].New York:wiley,1991:204. |
| [18] | Yajima S;Hasegama Y;Hayashi J et al.Synthesis of continuous silicon carbide fiber with high tensile strength and high youngs modulus,part 1:synthesis of polycar- bosilane as precursor[J].Journal of Materials Science,1978,13:2569-2576. |
| [19] | Hasegawa Y .Synthesis of continuous silicon carbide fi- ber,part 6:pyrolysis process of cured polycarbosilanefiber and structure of SiC fiber[J].Journal of Materials Science,1989,24:1177-1190. |
| [20] | Ichikawa H;Teranishi H;Ishikawa T .Effect of curing conditions on mechanical properties of silicon carbide fi- ber (Nicalon)[J].Journal of Materials Science Letters,1987,6:420-422. |
| [21] | Narisawa M;Kitano S;Okamura K et al.Synthesis of silicon carbide fiber from blended precursor of organosili- con polymers[J].Journal of the American Ceramic Society,1995,78:3405-3408. |
| [22] | 李晓霞,冯春祥,宋永才.聚碳硅烷纤维的不熔化处理研究（III）--不熔化机理的探讨[J].宇航材料工艺,2000(02):33-36. |
| [23] | Hasegawa Y;Iimura M;Yajima S .Synthesis of contin- uous silicon carbide fiber,part 2:conversion of polycar- bosilane fiber into silicon carbide fibers[J].Journal of Materials Science,1980,15:720-728. |
| [24] | Laine R M;Babonneau F .Preceramic polymer routes to silicon carbide[J].Chemistry of Materials,1993,5:260-279. |
| [25] | Shimoo T;Sugimoto M;Okamura K .Effect of crystal linity on pyrolytic rate of silicon carbide fiber[J].J Ce- ram Soc Jpn,1990,98:1324-1329. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%