本文从宏观的角度探讨了泡沫镍的单向拉伸断裂行为.将孔率为88.29%的泡沫镍试样在室温下进行不同速率的单向拉伸,并与致密镍板的拉伸断裂现象进行对照,考察其拉伸断裂行为的异同.结果表明,泡沫体在拉伸过程中亦表现出宏观的塑性变形特征,但相对于致密体来说,其宏观脆性显著提高.此外,泡沫体在断裂时表现为一个明显的渐进过程,而致密体则相应为一个瞬间过程.
The tensile fracture has been macroscopically investigated for nickel foam under uniaxial tension. The samples of nickel foam with porosity of 88.29% were uniaxially tensioned at various rates at room temperature, and the phenomena of tensile fracture were compared with that from the fully dense plate of metal nickel, so as to inves-tigate the differences in their tensile fracture behaviors. The results indicate that nickel foam also displays the fea-ture of macroscopic plastic deformation during tension, but it shows a macroscopic brittleness much more than that of the fully dense body. In addition, it's an obviously gradual course for the foamed body fracture, and a transient process for the dense body.
参考文献
| [1] | Gibson L J;Ashby M F.Cellular Solids[M].Cambridge:Cambridge University Press,1997 |
| [2] | 刘培生.多孔材料引论[M].北京:清华大学出版社,2004 |
| [3] | Ashby M F.Metal Foams,A Design Guide[M].Boston:Elsevier Science,2000 |
| [4] | Liu P S .[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,384(1-2):352. |
| [5] | Liu P S .[J].Journal of Materials Science and Technology,2004,20(05):669. |
| [6] | Silva M G D A;Ramesh K T .[J].Materials Science and Engi-neering A,1997,232:11. |
| [7] | Kovacik J .[J].Acta Materials,1998,46(15):5413. |
| [8] | Liu P S .[J].Journal of Advanced Materials,2000,32(02):9. |
| [9] | Badiche X et al.[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2000,289:276. |
| [10] | Nieh T G et al.[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2000,283:105. |
| [11] | Kwon YW.;Cooke RE.;Park C. .Representative unit-cell models for open-cell metal foams with or without elastic filler[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):63-70. |
| [12] | Cboe H;Dunand D C .[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,384(1-2):184. |
| [13] | Liu P S et al.[J].Journal of Materials Science and Technology,2003,19(06):985. |
| [14] | Liu P S .[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2006,422(1-2):176. |
| [15] | Liu P S et al.[J].Materials & Design,2007,28:2678. |
| [16] | Liu P S;Chapter 3;Porous Materials.The mathematicalphysical expressions for some properties of three-dimensional reticulated porous metallic materials in the same analytical model system[A].New York:NOVA Science Publishers,2007 |
| [17] | Liu PS.;Liang KM. .Functional materials of porous metals made by P/M, electroplating and some other techniques [Review][J].Journal of Materials Science,2001(21):5059-5072. |
| [18] | Babjak J;Ettel V A;Paserin V .Nickel foam[P].EP 0402738A2,1990. |
| [19] | Liu P S;Liang K M .[J].Journal of Materials Science and Technology,2000,16(06):575. |
| [20] | 刘瑞堂;刘文博;刘锦云.工程材料力学性能[M].哈尔滨:哈尔滨工业大学出版社,2001 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%