材料期刊网

The effect of delay time with constant first finishing pass temperature (800℃) has been investigated by means of multi-pass torsion tests on Ti-Nb-IF steel. All the tests have been carried out at a strain rate of 2 s-1 with 11 passes and 0.3 strain each pass. During the final pass, dynamic recrystallization occurs to a degree that depends on the delay time. In short interpass time (1 s) and at these temperatures (T≤800℃) there is not enough time to start static recrystallization, therefore, accumulation of strain occurs and after some passes, strain reaches a critical strain for starting dynamic recrystallization. In this study, the changes of mean flow stress during each pass and also the microstructural observation confirms that dynamic recrystallization occurs after some passes in ferrite phase of this steel. The stress-strain curves with constant temperature obtained by using a kinetic model and compensation of the increasing mean flow stress with decreasing temperature. Thus, this result also confirms that dynamic recrystallization occurs in warm rolling of this IF steel.