The effects of the process parameters of TIG (tungsten inset gas)-flux welding on the welds morphology,angular distortion, ferrite content and hot cracking in austenitic stainless steel were investigated. Autogenous TIG welding process was applied to the type 304 stainless steel through a thin layer of activating flux to produce a bead on plate welded joint. TiO2, SiO2, Fe2O3, Cr2O3, ZnO and MnO2 were used as the activating fluxes. The experimental results indicated that the TIG-flux welding can increase the weld depth/width ratio and reduce the HAZ (heat affected zone) range, and therefore the angular distortion of the weldment can be reduced. It was also found that the retained ferrite content within the TIG-flux welds is increased, and has a beneficial effect in reducing hot cracking tendency for stainless steels of the austenitic type weld metals. A plasma column constriction increases the current density at the anode spot and then a substantial increase in penetration of the TIG-flux welds can be obtained.
参考文献
| [1] | W Lucas;D Howse .[J].Welding & Metal Fabrication,1996,64:11. |
| [2] | P C J Anderson;R Wiktorowicz .[J].Sci Technol Weld Met Fabr,1996,64:108. |
| [3] | S M Gurevich;V N Zamkov .[J].Avtoma Svarka(in Russian),1966,12:13. |
| [4] | M.Tanaka;T.Shimizu .Effects of activating flux on arc phenomena in gas tungsten arc welding[J].Science and Technology of Welding and Joining,2000(6):397-402. |
| [5] | W Middel;G den Ouden .[J].Science and Technology of Welding and Joining,1999,4(06):335. |
| [6] | T Paskell;C Lundin;H Castner .[J].Welding Journal,1997,76(04):57. |
| [7] | M. Kuo;Z. Sun;D. Pan .Laser welding with activating flux[J].Science and Technology of Welding and Joining,2001(1):17-22. |
| [8] | Chunli YANG,Sanbao LIN,Fengyao LIU,Lin WU,Qingtao ZHANG.Research on the Mechanism of Penetration Increase by Flux in A-TIG Welding[J].材料科学技术学报(英文版),2003(z1):225-227. |
| [9] | H Y Huang;S W Shyu;K H Tseng;C P Chou.[A].Georgia,USA,ASM International,2005:5552. |
| [10] | T Ogawa;E Tsunetomi .[J].Welding Journal,1982,61(03):82. |
| [11] | J A Brook .[J].Welding Journal,1974,53(11):517. |
| [12] | C D Lundin;P W Turner .[J].Welding Journal,1970,49(12):579. |
| [13] | K.H. Tseng;C.P. Chou .The effect of pulsed GTA welding on the residual stress of a stainless steel weldment[J].Journal of Materials Processing Technology,2002(3):346-353. |
| [14] | K.H.Tseng;C.P.Chou .Effect of pulsed gas tungsten arc welding on angular distortion in austenitic stainless steel weldments[J].Science and Technology of Welding and Joining,2001(3):149-153. |
| [15] | D Howse;W Lucas .[J].Science and Technology of Welding and Joining,2000,5(03):189. |
| [16] | C J Long;W T Delong .[J].Welding Journal,1973,52(07):281. |
| [17] | K H Tseng;C P Chou .[J].Science and Technology of Welding and Joining,2001,7(01):57. |
| [18] | F C Hull .[J].Welding Journal,1967,46(09):399. |
| [19] | H Y Huang;S W Shyu;K H Tseng;C P Chou .[J].Science and Technolngy of Welding and Joining,2005,10(05):566. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%