A cellular automaton (CA)-finite element (FE) model and a phase field (PF){FE model were used to simulate equiaxed dendritic growth during the solidification of hexagonal metals. In the CA-FE model, the conservation equations of mass and energy were solved in order to calculate the temperature field, solute concentration, and the dendritic growth morphology. CA{FE simulation results showed reasonable agreement with the previously reported experimental data on secondary dendrite arm spacing (SDAS) vs cooling rate. In the PF model, a PF variable was used to distinguish solid and liquid phases similar to the conventional PF models for solidification of pure materials. Another PF variable was considered to determine the evolution of solute concentration. Validation of both models was performed by comparing the simulation results with the analytical model developed by Lipton-Glicksman-Kurz (LGK), showing quantitatively good agreement in the tip growth velocity at a given melt undercooling. Application to magnesium alloy AZ91 (approximated with the binary Mg-8.9 wt% Al) illustrates the di±culty of modeling dendrite growth in hexagonal systems using CA-FE regarding mesh-induced anisotropy and a better performance of PF{FE in modeling multiple arbitrarily-oriented dendrites growth.
参考文献
| [1] | |
| [2] | |
| [3] | D. Askeland: The Science of Materials and Engineering, Thompson, Brooks/Cole, Belmont, CA, 2003.[2 ] R. Trivedi and W. Kurz: Int. Mater. Rev., 1994, 39(2), 49.[3 ] R. Kobayashi: Physica D, 1993, 63, 410.[4 ] S.L. Wang, R.F. Sekerka, A.A. Wheeler, B.T. Murray, S.R. Coriell, R.J. Braun and G.B. McFadden: Physica D, 1993, 69, 189.[5 ] J.A. Warren, W.J. Boettinger, C. Beckermann and A. Karma: Annu. Rev. Mater. Res., 2002, 32, 163.[6 ] X. Tong, C. Beckermann, A. Karma and Q. Li: Phys. Rev. E, 2001, 63, 061601.[7 ] A. Karma and W.J. Rappel: Phys. Rev. E, 1998, 57, 4323.[8 ] I. Steinbach: Model. Simul. Mater. Sci. Eng., 2009, 17, 073001.[9 ] J.A. Warren and W.J. Boettinger: Acta Metall. Mater., 1995, 43, 689.[10] A.A. Wheeler, W.J. Boettinger and G.B. McFadden: Phys. Rev. A, 1992, 45, 7424.[11] N. Provatas and M. Greenwood: Int. J. Modern Phys. B, 2005, 19, 4525.[12] C. Beckermann, H.J. Diepers, I. Steinbach, A. Karma and X. Tong: J. Comput. Phys., 1999, 154, 468.[13] N. Ofori-Opoku and N. Provatas: Acta Mater., 2010, 58, 2155.[14] H. Kobayashi, M. Ode, S.G. Kim, W.T. Kim and T. Suzuki: Scripta Mater., 2003, 48, 689.[15] J. Wang and G. Yang: Acta Mater., 2008, 56, 4585.[16] Y. Xu, J.M. McDonough and K.A. Tagavi: J. Comput. Phys., 2006, 218, 770.[17] J.C. Ramirez, C. Beckermann, A. Karma and H.J. Diepers: Phys. Rev. E, 2004, 69, 051607.[18] M. Rappaz and C. Gandin: Acta Metall. Mater., 1993, 41, 345.[19] C.A. Gandin and M. Rappaz: Acta Metall. Mater., 1994, 42, 2233.[20] L.B. Sanchez and D.M. Stefanescu: Metall. Mater. Trans. A, 2003, 34, 367.[21] L.B. Sanchez and D.M. Stefanescu: Metall. Mater. Trans. A, 2004, 35, 2471.[22] M.F. Zhu and D.M. Stefanescu: Acta Mater., 2007, 55, 1741.[23] M.F. Zhu and C.P. Hong: Metall. Mater. Trans. A, 2004, 35, 1555.[24] M.F. Zhu, S.Y. Lee and C.P. Hong: Phys. Rev. E, 2004, 69, 061610-1-12.[25] Y.H. Shin and C.P. Hong: ISIJ Int., 2002, 42, 359.[26] W. Wang, P.D. Lee and M. McLean: Acta Mater., 2003, 51, 2971.[27] C.A. Gandin, J.L. Desbiolles, M. Rappaz and P. Thevoz: Metall. Mater. Trans. A, 1999, 30, 3153.[28] S.G.R. Brown and N.B. Bruce: J. Mater. Sci., 1995, 30, 1144.[29] L. Huo, Z.Q. Han and B.C. Liu: Acta Metall. Sin., 2009, 45, 1414. (in Chinese)[30] L. Huo, Z. Han and B. Liu: Mater. Sci. Forum, 2010, 638-642, 1562.[31] J.W. Cahn and J.E. Hilliard: J. Chem. Phys., 1958, 28, 258.[32] S.M. Allen and J.W. Cahn: Acta Metall., 1979, 27, 1085.[33] B. Bottger, J. Eiken and I. Steinbach: Acta Mater., 2006, 54, 2697.[34] Z.Y. Liu, Q.Y. Xu and B.C. Liu: Int. J. Cast Metals Res., 2007, 20, 109.[35] N. Ricketts: Properties of Cast Magnesium Alloys, http://members.tripod.com/Mg/asm prop.htm.[36] H. Yan, W. Zhuang, Y. Hu, Q. Zhang and H. Jin: J. Mater. Process. Technol., 2007, 187-188, 349.[37] H. Hu and A. Yu: Model. Simul. Mater. Sci. Eng., 2002, 10, 1.[38] Z.A. Fu, Y. Qing and S.M. Xong: Mater. Sci. Forum, 2007, 546-549, 133.[39] M.J.M. Krane, D.R. Johnson and S. Raghavan: Appl. Math. Model., 2009, 33, 2234.[40] G.S. Grest, D.J. Srolovitz and M.P. Anderson: Acta Metall., 1985, 33, 509.[41] A. Jacot and M. Rappaz: Acta Mater., 2002, 50, 1909. [42] Q. Du and A. Jacot: Acta Mater., 2005, 53, 3479.[43] W. Yang, L. Chen and G.L. Messing: Mater. Sci. Eng. A, 1995, 195, 179.[44] H. Yin and S.D. Felicelli: Model. Simul. Mater. Sci. Eng., 2009, 17, 075011.[45] T. Borzsonyi and A. Buka: Phys. Rev. E, 1998, 58, 6236.[46] L. Nastac: Acta Mater., 1999, 47, 4253.[47] K.R. Elder, M. Grant, N. Provatas and J.M. Kosterlitz: Phys. Rev. E, 2001, 64, 021604.[48] M. Asle Zaeem and S.D. Mesarovic: J. Comp. Phys., 2010, 229, 9135.[49] A.M. Mullis, J. Rosam and P.K. Jimak: J. Cryst. Growth, 2010, 312, 1891.[50] D. Danilov and B. Nestler: Acta Mater., 2006, 54, 4659.[51] M. Asle Zaeem and S.D. Mesarovic: Solid State Phenom., 2009, 150, 29.[52] M. Asle Zaeem and S.D. Mesarovic: ASME Conf. Proc., 2008, 12, 267, doi:10.1115/IMECE2008-66767.[53] M. Asle Zaeem and S.D. Mesarovic: Comput. Mater. Sci., 2011, 50, 1030.[54] COMSOL Multiphysics Users's Guide, COMSOL Inc., 2010.[55] M.C. Flemings: Solidi¯ |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%