The bubble deformation processes were reported when gas was injected into polymer melt flow field in another paper, the experiments showed that the deformation was severely affected by the volume of the bubble, and in turn, for the different bubbles, several different deformation processes were presented during their movement along the flow channel. In addition, we could find that the magnitude of the bubble volume was dependent upon the pressure difference of the gas injection pressure and the melt pressure. In this paper, more experimental conditions were changed to investigate the parameters relevant to the detachment of bubbles from the injection nozzle. The experimental results show that the pressure difference, the melt flow velocity as well as the melt pressure were all critical for the parameters, such as the bubble detachment time, the maximum bubble diameters and the magnitude of the bubble volume. The morphology changes of bubble were very large when the flow field was abruptly changed, and the situations were more complicated.
参考文献
| [1] | Lee Chen;Xiang Wang;Rich Straff;Kent Blizard .Shear Stress Nucleation in Microcellular Foaming Process[J].Polymer engineering and science,2002(6):1151-1158. |
| [2] | LI Si-nian,SONG Shou-zhi,YU Tian-qing,CHEN Hui-Min,ZHANG You-shou,SHEN Jin-long.Properties and Structure of Magnesium Matrix Composite Reinforced with CNTs[J].武汉理工大学学报(材料科学版)英,2004(01):65-68. |
| [3] | YU Jian-ying,SUN Tao,SUN Yu-bin,ZHOU Hu.Influence of Matrixes on Microstructure and Properties of CTBN Toughened Epoxy Resins[J].武汉理工大学学报(材料科学版)英,2001(02):17-20. |
| [4] | J A Biesenberger;S T Lee .A Fundamental Study of Polymer Melt Devolatilization: III More Experiments on Foam-enhanced DV[J].Polymer Engineering and Science,1987,27(07):510. |
| [5] | SHAN Songgao,Gao Dingshan,CHEN Wen,YUAN Runzhang.THE NANOCOMPOSITE FILM OF POLYMER |
| [6] | M Favelukis;Z Tadmor;R Semiat .Bubble Growth in a Viscous Liquid in a Simple Shear Flow[J].AICHE Journal,1999,45:691. |
| [7] | Y C Peng;M C Guo;L Li;K L Li .Research of Bubble Bhape and Interfacial Characteristics when CO2 Injected into HDPE Melt[J].Journal of Materials Science Letters,2003,22(08):639-641. |
| [8] | M C Guo;Y C Peng;K L Li .Mathematical Simulation of the Shape for Bubbles Injected into Polymer Melt,Polymer Engineering and Science[J].Polymer Engineering and Science,2003,68(04):445-449. |
| [9] | Z L Chen.Analysis of Interfaual Mophology and Mation during Gos-injecting into Polymermelt[M].Changsha:South China University of Technology,2000:89-101. |
| [10] | Y B Cai;M C Guo;Z L Chen.Study on the Interface Deformation when Gas Injected into Polymer Melt Flow Field[M].to be Published |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%