添加界面活性剂的核沸腾在改变蒸气泡生长特性的同时,主要是强化了对流换热.本文考虑流体湿润性影响,对核沸腾换热沿用最广的对流类比模型-Rohsenow模型进行了修正.通过对实验数据的检验,表明修正后的模型预示值与实测结果吻合很好.
参考文献
[1] | 文东升;王补宣;彭晓峰.添加界面活性剂时核态沸腾传热的实验研究[A].,2000:139-141. |
[2] | Rohsenow W M .A Method of Correlating Heat Transfer Data for Surface Boiling of Liquids[J].Journal of Heat Transfer,1952,74(04):969-973. |
[3] | Wang C H;Dhir V K .Effect of Surface Wettability on Active Nucleation Site Density During Pool Boiling of Water on a Vertical Surface[J].Journal of Heat Transfer,1993,115:659-669. |
[4] | BANKOFF S G .Entrapment of Gas in Spreading of Liquid Over a Rough Surface[J].AICHE Journal,1958,4:24-26. |
[5] | Yang S R;Kim R H .A Mathematical Model of the Pool Boiling Nucleation Site Density in Terms of the Surface Characteristics[J].International Journal of Heat and Mass Transfer,1988,31:1127-1135. |
[6] | Wang C H;Dhir V K .Effect of Surface Wettability on Active Nucleation Site Density During Pool Boiling of Water on a Vertical Surface[J].Journal of Heat Transfer,1993,115:659-669. |
[7] | Cole R;Rohsenow W M.Correlation of Bubble Departure Diameters for Boiling of Saturated Liquids[A].,1968 |
[8] | Wu W T .Mechanism of Pool Boiling Heat Transfer in Aqueous Surfactant Solutions[D].National Cheng Kung University (Taiwan),1998. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%