采用XD法原位合成TiCp/Al预制块, 并通过XRD、 SEM、 EDAX和DTA等手段研究了预制块的组织和性能, 探讨了TiCp/Al预制块在镁液中的熔化行为. 结果表明: TiCp/Al预制块中, 基体Al的熔点约为635.7.℃, 略低于纯铝的熔点, 但TiC粒子之间存在较强的结合力, 使其在高温加热时仍能保持原有形状; 未搅拌时, TiCp/Al预制块在800.℃的镁液中保温60.min后仍不熔化, 采用搅拌工艺有利于促进TiCp/Al预制块的熔化, 并且使TiC粒子在熔体中均匀分布. TiCp/Al预制块在镁液中熔化时, 基体Al通过熔化和对流扩散进入到镁液中, TiC粒子间的较强的结合力需通过搅拌产生的剪切力才能破坏, 并随镁液流动进入到镁液中. 机械搅拌可使TiC粒子在镁液中均匀分布.
参考文献
| [1] | Inem B;Pollard G .Interface structure and fractography of a magnesium-alloy, metal-matrix composite reinforced with SiC particles[J].Materials Science,1993,28(16):4427-4434. |
| [2] | K.S.Sogn .Mechanical Property and Fracture Behavior of Squeeze-Cast Mg Matrix Composites[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1998(10):2543-2554. |
| [3] | Hu H .Squeeze casting of magnesium alloys and their composite[J].Materials Science,1998,33(06):1579-1589. |
| [4] | Hu H .Grain microstructure evolution of Mg(AM50A)/SiCp metal matrix composites[J].Scripta Materialia,1998,39(08):1015-1022. |
| [5] | Oo M K K;Ling P S;Gupta M .Characteristics of Mg-based composites synthesized using a novel mechanical disintegration and deposition technique[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2000,31(07):1873-1881. |
| [6] | Lee DM;Suh BK;Kim BG;Lee JS;Lee CH .Fabrication, microstructures, and tensile properties of magnesium alloy AZ91/SiCp composites produced by powder metallurgy[J].Materials Science and Technology: MST: A publication of the Institute of Metals,1997(7):590-595. |
| [7] | 郗雨林,张文兴,柴东琅,王秀苓.粉末冶金法制备SiC颗粒增强镁基复合材料工艺及性能的研究[J].热加工工艺,2001(05):24-26. |
| [8] | Saravanan R A;Surappa M K .Fabrication and characterization of pure magnesium-30vol% SiCp particle composite[J].Materials Science and Engineering,2000,A276(01):108-116. |
| [9] | 陈培生;孙扬善;蒋建清 .工艺因素对SiCp/Mg复合材料中颗粒分布的影响[J].东南大学学报(自然科学版),1997,27(05):17-23. |
| [10] | 郑明毅,吴昆,张巍,赵敏,姚忠凯,赵连城.预制块制备对挤压铸造SiCW/ZM5复合材料性能的影响[J].中国有色金属学报,1998(04):605-610. |
| [11] | 金头男,聂祚仁,李斗星.浸渍挤压（SiCw+B4Cp）/Mg（AZ91）复合材料的微观组织[J].中国有色金属学报,2002(01):110-114. |
| [12] | Murty B S;Thakur S K .On the infiltration behavior of Al, Al-Li, and Mg melts through SiCp bed[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2000,31(01):319-325. |
| [13] | Purazrang K;Kainer K U .Fracture toughness behavior of a magnesium alloy metal-matrix composite produced by the infiltration technique[J].Composites,1991,22(06):456-462. |
| [14] | Feng Wu;Jing Zhu;Yu Chen;Guoding Zhang .The effects of processing on the microstructures and properties of Gr/Mg composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):143-147. |
| [15] | Hu Lianxi;Wang Erde .Fabrication and mechanical properties of SiCw/ZK51A magnesium matrix composite by two-step squeeze casting[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):267-271. |
| [16] | Wood J V;Davies P;Kellie J L K .Properties of reactively cast aluminium-TiB2 alloys[J].Materials Science and Technology,1993,9(833-840) |
| [17] | Murthy V S R;Rao B S .Microstructure development in the directed melt- oxidized (DIMOX) Al-Mg-Si alloys[J].Materials Science,1995,30(12):3091-3097. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%