A computer model that describes the evolution of microstructures during the hot finishing rolling of SS400 steel has been proposed. It has been found that the microstructure strongly depends on processing of materials and on their parameters, which affected the history of the thermomechanical variables, such as temperature, strain, and strain rate. To investigate the microstructural evolutions during the hot finishing rolling process, the rigid-thermoviscoplastic finite element method (FEM)has been combined with dynamic recrystallization, static recrystallization, and grain growth models.The simulation results show a good agreement with those from the prediction software online.
参考文献
| [1] | M. Brunet;S. Mguil;P. Pol .Modelling of a roll-forming process with a combined 2D and 3D FEM code[J].Journal of Materials Processing Technology,1998(0):213-219. |
| [2] | Y S Na;J T Yeom;N K Park;J.Y.Lee .[J].Journal of Materials Processing Technology,2003,141:337. |
| [3] | S. K. Lee;D. C. Ko;B. M. Kim .Optimal die profile design for uniform microstructure in hot extruded product[J].International Journal of Machine Tools & Manufacture: Design, research and application,2000(10):1457-1478. |
| [4] | J H Beynon;C M Sellars .[J].ISIJ International,1992,32(03):359. |
| [5] | Y. Liu;J. Lin .Modelling of microstructural evolution in multipass hot rolling[J].Journal of Materials Processing Technology,2003(0):723-728. |
| [6] | J. Lin;Y. Liu .A set of unified constitutive equations for modelling microstructure evolution in hot deformation[J].Journal of Materials Processing Technology,2003(0):281-285. |
| [7] | J. Lin;F. P. E. Dunne .Modelling grain growth evolution and necking in superplastic blow-forming[J].International Journal of Mechanical Sciences,2001(3):595-609. |
| [8] | H. Dyja;P. Korczak .The thermal-mechanical and microstructural model for the FEM simulation of hot plate rolling[J].Journal of Materials Processing Technology,1999(0):463-467. |
| [9] | Z D Qu;S H Zhang.[A].Columbus,Ohio,USA,2004:1737. |
| [10] | Z.J.Luo;D.Liu .A novel method for predicting the grain size of superalloy forgings based on the fuzzy method and the FEM[J].Journal of Materials Processing Technology,2000(s1-3):246-249. |
| [11] | T. Sheppard;X. Duan .Modelling of static recrystallisation by combining FEM with empirical models[J].Journal of Materials Processing Technology,2002(0):250-253. |
| [12] | Y S Jang;D C Ko;B M Kim .[J].Journal of Materials Processing Technology,2000,101:85. |
| [13] | W. Bang;C. S. Lee;Y. W. Chang .Finite element analysis of hot forging with flow softening by dynamic recrystallization[J].Journal of Materials Processing Technology,2003(2):153-158. |
| [14] | C.J. Huang;D.Z. Li;Y.Y. Li .A finite element analysis of strain induced transformation rolling and an experimental study on the grain refinement potential of severe undercooling thermo-mechanical treatment[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):136-143. |
| [15] | Y T Zhang;C L Mo;D Z Li;Y.Y.Li .[J].Journal of Materials Science and Technology,2003,19(03) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%