The open-cell Al foam core sandwiches (AFCSs) were successfully fabricated by using a specially designed Zn-Al-Cu based filler alloy via vibration aided liquid phase bonding method. The effects of the vibration on the bonding seam were investigated and the bonding strength between Al foam core and solid Al alloy face sheet was tested by shearing tests. The results show that vibration can significantly improve the quality of the bonding and the shearing strength of the bonding seam, which implies that this joining method has a good potential in practical applications.
参考文献
| [1] | |
| [2] | |
| [3] | |
| [4] | |
| [5] | M. F. Ashby, A. Evans, N. A. Fleck, L. J. Gibson, J. W. Hutchinson and H. N. G. Wadley: Metal Foams: A Design Guide., Butterworth-Heinemann, Boston , 2000, 3.[2]H. P. Degischer and B. Kriszi: Handbook of Cellular Metals, Wiley-VCH, Weinheim, 2002, 71.[3]M. F. Ashby and T. J. Lu: Sci. China, 2003, B46, 521.[4] A. G. Evans, J. W. Hutchinson and M. F. Ashby: Progr. Mater. Sci, 1999, 43, 171. [5] L-P. Lefebvre, J. Banhart and D. C. Dunand: Adv. Eng. Mater, 2008, 10, 775.[6] J. Banhart: Int. J. Vehicle. Design, 2005, 37, 114.[7] J. Banhart and H-W. Seeliger: Adv. Eng. Mater, 2008, 10, 793.[8]R. A. Shenoi and J. F. Wellicome: Composite Materials in Maritime Structures, Cambridge University Press, Cambridge, 1993, 154.[9] D. Schwingel, H-W. Seeliger H-W, C. Vecchionacci, D. Alwes and J. Dittrich: Acta Astrona, 2007, 61, 326.[10]L. J. Gibson and M. F. Ashby: Cellular Solids: Structure and Properties, 2nd edn, Cambridge University Press, Cambridge, 1997, 125.[11]D. P. He: Ultralight Porous Metals, Science Press, Beijing, 2009, 93.(in Chinese)[12] F. Baumg?rtner, I. Duarte and J. Banhart : Adv. Eng. Mater, 2000, 2, 168.PDF下载
计量
文章评分
|