欢迎登录材料期刊网

材料期刊网

高级检索

采用热重法研究了中铬铁素体不锈钢的高温氧化行为,测定出不同温度条件下的氧化增重曲线,其氧化增重符合抛物线规律,由于溶质铬元素的选择性氧化形成致密的氧化层阻碍离子扩散造成实验钢的氧化激活能较高为560 kJ/mol.通过氧化铁皮表面形貌观察,在氧化铁皮表面生成部分异常长大的突起铁-铬尖晶石相,并随着氧化温度升高,有增多和长大趋势.当氧化温度为1100℃时,氧化铁皮出现了分层,氧化铁皮最外层为富铁的氧化物(FeO和Fe3O4为主),将突起铁-铬尖晶石相包裹住.结合热轧粘辊实验结果表明,突起的铁-铬尖晶石容易划伤轧辊表面形成裂纹源,在后续循环轧制过程中急剧的冷热循环和轧制变形,促进了裂纹形成和扩展,为热轧粘辊提供了形核地点.高温轧制促进表面富铁的氧化物的生成,消除突起铁-铬尖晶石相可有效的降低热轧粘辊.

参考文献

[1] 童丽华,李春福.超纯铁素体不锈钢及其抗应力腐蚀研究进展[J].金属热处理,2014(09):127-131.
[2] ISHII Kazuhide;ISHII Tomohiro;OTA Hiroki .Ni- and Mo-Free Ferritic Stainless Steel with High Corrosion Resistance, JFE443CT[J].JFE technical report,2008(12):39-44.
[3] El-Kashif E;Asakura K;Koseki T et al.Effects of boron,niobium and titanium on grain growth in ultra high purity 18% Cr ferritic stainless steel[J].ISIJ International,2004,44(9):1568-1575.
[4] K.H. Lo;C.H. Shek;J.K.L. Lai .Recent developments in stainless steels[J].Materials Science & Engineering. R, Reports,2009(4/6):39-104.
[5] 师吕绪;陆达;荣科 .中国高温合金40年[J].金属学报,1997,33(1):1-8.
[6] 王明家,信瑞山,龙珊珊,褚春光.固溶态316LN不锈钢的氧化行为[J].材料热处理学报,2012(08):74-78.
[7] Yamauchi A;Kurokawa K;Takahashi H et al.High temperature oxidation of SUS430 in H2O-containing atmospheres at 1473 K[J].Journal of the Japan Institute of Metals,2000,64(5):359-362.
[8] 郭立峰,魏彦筱,张晓昱,郝晓军.18-8奥氏体不锈钢水蒸汽氧化的失效分析[J].华北电力技术,2005(08):21-23.
[9] 张丽,李鑫,郑宏光.国外铁素体不锈钢黏辊行为试验研究进展[J].世界钢铁,2009(06):39-46.
[10] W.Jin .Effect of Roll and Rolling Temperatures on Sticking Behavior of Ferritic Stainless Steels[J].ISIJ International,1998(7):739-743.
[11] Sunghak L;Dongwoo S;Seungchan O et al.Sticking mechanism during hot rolling of two stainlesssteels[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,29(2):696-702.
[12] Son C Y;Kim C K;Ha D J et al.Mechanisms of sticking phenomenon occurring during hot rolling of two ferritic stainless steels[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2007,38(9):2776-2787.
[13] Ha D;Lee J;Kim N et al.Effects of alloying elements on high-temperature oxidation and sticking occurring during hot rolling of modified ferritie STS430J1L stainless steels[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2012,43(1):74-86.
[14] Young D J.High Temperature Oxidation and Corrosion of Metals[M].London:Access Online via Elsevier,2008
[15] Kofstad P .Low-pressure oxidation of tantalum at 1300 ~ 1800 ℃[J].Journal of the Less Common Metala,1964,7(4):241-266.
[16] Neil Berks;Gerale H Meier;Fred S Pettit.Introduction to the High-Temperature Oxidation of Metals[M].Cambridge,UK:Cambridge University Press,2006
[17] 张驰,刘振宇,王国栋.超纯21%Cr铁素体不锈钢的热变形行为研究[J].钢铁研究学报,2010(12):27-32.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%