建立了复合材料加筋板在横向低速冲击载荷作用下的渐进损伤有限元模型.该模型考虑了复合材料加筋板受低速冲击时的纤维断裂、基体开裂及分层脱粘等五种典型的损伤形式,在层内采用应变描述的失效判据,结合相应的材料性能退化方案,通过编写VUMAT用户自定义子程序以实现相应损伤类型的判断和演化.在层间以及筋条与层板间加入界面元,模拟层间区域的情况,结合传统的应力失效判据和断裂力学中的能量释放率准则来判断分层损伤的起始和演化规律.通过对数值模拟结果与实验数据的比较,验证了模型的合理性和有效性.同时探讨了不同位置、不同冲击能量以及含初始损伤(脱粘)等因素对复合材料加筋板低速冲击性能的影响.
参考文献
| [1] | Greenhalgh E,Meeks C,Clarke A,Thatcher J.The effect of defects on the performance of post-buckled CFRP stringer-stiffened panels[J].Composites Part A,2003,34(7):623-633. |
| [2] | 赵秀峰.复合材料加筋板冲击损伤及损伤容限研究[D].西安:西北工业大学,2007.Zhao Xiufeng.Damage behavior of the stiffened plates subjected to the low-velocity impact[D].Xi'an:Northwestern Polytechnical University,2007. |
| [3] | 王一飞.复合材料层压板和加筋结构的低速冲击响应与损伤参数关系研究[D].上海:上海交通大学,2012.Wang Yifei.Research on the relationship of low-velocity impact response and damage of composite laminate and stiffener[D].Shanghai:Shanghai Jiao Tong University,2012. |
| [4] | Orifici A C.Degradation models for the collapse analysis of composite aerospace structures[D].Melbourne,Australia:RMIT University,2007. |
| [5] | 孙旋.复合材料加筋板冲击损伤模拟和剩余强度分析[D].南京:南京航空航天大学,2010.Sun Xuan.Simulation of impact damage and the CAI on stiffened composite panels structures[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2010. |
| [6] | Faggiani A,Falzon B G.Predicting low-velocity impact damage on a stiffened composite panel[J].Composites Part A,2010,41(6):737-749. |
| [7] | Choi H Y,Chang F K.A model for predicting damage in graphite/epoxy laminated composites resulting from lowvelocity point impact[J].Journal of Composite Materials,1992,26(14):2134-2169. |
| [8] | 朱炜垚,许希武.复合材料层合板低速冲击损伤的有限元模拟[J].复合材料学报,2010,27(6):200-207.Zhu Weiyao,Xu Xiwu.Finite element simulation of low velocity impact damage on composite laminates[J].Acta Materiae Compositae Sinica,2010,27(6):200-207. |
| [9] | Hou J P,Petrinic N,Ruiz C,et al.Prediction of impact damage in composite plates[J].Composite Science and Technology,2000,60(2):273-281. |
| [10] | Gong S W,Lam K Y.Transient response of stiffened composite plates subjected to low-velocity[J].Composites Part B,1999,30(5):473-484. |
| [11] | 孟阿军.冲击载荷下加筋板壳结构损伤数值仿真[D].武汉:华中科技大学,2007.Meng Ajun.Numerical simulation on the failure of stiffened plate and shell structure under impact of dynamic loading mechanism[D].Wuhan:Huazhong University of Science and Technology,2007. |
| [12] | Camanho P P,Matthews F L.A progressive damage model for mechanically fastened joints in composite laminates[J].Journal of Composite Materials,1999,33(24):2248-2280. |
| [13] | Pedro P C,Carlos G D.Mixed-mode decohesion finite elements for the simulation of delamination in composite materals,NASA/TM-2002-211737[R].Washington:NASA,2002. |
| [14] | Fan C Y,Jar P B.Cohesive zone with continuum damage properties for simulation of delamination development in fibre composites and failure of adhesive joints[J].Engineering Fracture Mechanics,2008,75(13):3866-3880. |
| [15] | Yang Q D,Cox B.Cohesive models for damage evolution in laminated composites[J].International Journal of Fracture,2005,133(2):107-137. |
| [16] | Hu N,Zemba Y,Okabe T,et al.A new cohesive model for simulating delamination propagation in composite laminates under transverse loads[J].Mechanics of Materials,2008,40(11):920-935. |
| [17] | Cui W,Wisnom M R.A combined stress-based and fracture mechanics-based model for predicting delamination in composites[J].Composites,1993,24(6):467-474. |
| [18] | Aymerich F,Dore F,Priolo P.Prediction of impact-induced delamination in cross-ply composite laminates using cohesive interface elements[J].Composites Science and Technology,2008,68(12):2383-2390. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%