风口前理论燃烧温度是衡量熔融气化炉风口前热平衡和预测炉缸热状态的重要参数之一。依据考虑SiO2还原的理论燃烧温度计算公式,分析了在熔融气化炉喷煤对风口前理论燃烧温度的影响。计算了不同喷煤条件下,熔融气化炉风口前的理论燃烧温度。在此基础上讨论了喷煤比、挥发分及焦炭（半焦）进入燃烧区域的温度等参数的影响,为选择适合COREX熔融气化炉喷吹煤提供了必要的依据。
The theoretical flame temperature （TFT） before tuyere in COREX melter-gasifier was one of the most important parameters to measure the heat balance of the area before tuyere and predict the thermal state of the hearth. Based on the calculating formula of TFT with regard to the reduction of SiOz , the effect of pulverized coal injection （PCI） into melter-gasifier on TFT before tuyere was discussed. TFT before tuyere in melter-gasifier under different PCI conditions was calculated. Afterwards, the effects of PCI rate, volatile matter content and the temperature of coke （semicoke） entering the combustion zone were all discussed, which provided necessary references for choosing proper coal types for PCI into COREX melter-gasifier.
参考文献
| [1] | Delport H M W .The Corex Process[J].Ironmaking and Steelmaking,1992,19(03):18. |
| [2] | 吴铿,张二华,万鹏,屈俊杰,李康,杨森.关于COREX流程熔融气化炉风口前理论燃烧温度的思考[J].煤炭学报,2010(10):1730-1734. |
| [3] | 张二华,吴铿,万鹏,韦少华,李康,杨森.SiO2还原对高炉风口前理论燃烧温度的影响[J].北京科技大学学报,2010(11):1406-1411. |
| [4] | 郑涛,吴铿,徐万仁,朱仁良,姜伟忠.高炉炉尘中未消耗煤粉和焦炭比例的研究[J].钢铁,2006(03):20-24. |
| [5] | 杨天均;黄典冰;孔令坛.熔融还原[M].北京:冶金工业出版社,1998 |
| [6] | 吕庆 .COREX熔融气化炉内硅还原反应的特点[J].钢铁研究学报,1998,10(06):6. |
| [7] | 曲迎霞,王臣,邹宗树,周渝生.COREX工艺静态模型的开发[J].钢铁,2008(04):10-13. |
| [8] | 曹希荣,张丙怀,阳海彬.COREX喷煤燃烧利用的研究[J].钢铁研究,2009(02):17-19,30. |
| [9] | Schiller W;Siuka D;Freydorfer H.COREX Technol- ogy-Gained Success and Future Development[A].Beijing:The Chinese Society for Metal,2001:391. |
| [10] | 李康 .COREX用煤在熔融气化炉内裂解机理的模拟试验研究[D].北京:北京科技大学,2010. |
| [11] | 吴铿;陈春元;刘兴慧 等.高炉渣在高温条件下与碳还原的研究[J].北京科技大学学报,2000,22(01):1. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%