高温合金具有较高的强度、抗高温氧化性等性能,被广泛应用于各种领域中,其加工时切削温度高、加工硬化严重、刀具磨损严重,是最难加工的材料之一.本文综述了国内外高温合金切削刀具的研究现状.阐述了高温合金的切削特性,重点对高速钢、硬质合金、涂层硬质合金、陶瓷、PCVB这几类高温合金切削刀具材料的研究现状进行了分析;同时,也对国内外切削高温合金刀具的结构、切削加工工艺参数以及磨损机理的研究现状进行了概述.在此基础上,发现高温合金切削刀具虽然已经研发设计出了多种新刀具材料、新切削工艺参数,但仍然需要进一步了解影响刀具性能的因素及刀具磨损机理.因此,本文提出了建立评估刀具使用性能体系和研发高性能的刀具材料是高温合金切削刀具的主要研究方向.
参考文献
| [1] | 宁礼奎 .四种镍基高温合金的抗热腐蚀性能研究[D].大连理工大学,2008. |
| [2] | 郭建亭.高温合金材料学(上)[M].北京:科学出版社,2008 |
| [3] | 冯振兴 .涂层硬质合金刀具切削铁基高温合金试验研究[D].大连理工大学,2013. |
| [4] | 贾崇林 .高温合金的发展与需求应用[J].金属材料研究,2011,37(4):18-23. |
| [5] | R. W. Swindeman;M. J. Swindeman .A comparison of creep models for nickel base alloys for advanced energy systems[J].International Journal of Pressure Vessels and Piping,2008(1/2):72-79. |
| [6] | 郭建亭,杜秀魁.一种性能优异的过热器管材用高温合金GH2984[J].金属学报,2005(11):1221-1227. |
| [7] | 长谷川正义;三岛良绩;孙守仁.核反应堆材料手册[M].北京:原子能出版社,1987 |
| [8] | 杨文斗.反应堆材料学[M].北京:原子能出版社,2000 |
| [9] | 赵秀芬,王玉华,刘阳,王兴林,万熠.镍基高温合金的切削加工[J].航空制造技术,2010(11):46-50. |
| [10] | Ezugwu E O;Wang Z M;Machado A R .The machinability of nickel-based alloys:a review[J].Journal of Materials Processing Technology,1998,86(1):1-16. |
| [11] | 左敦稳;黎向锋;赵剑峰.现代加工技术[M].北京:北京航空航天大学出版社,2005 |
| [12] | 冶军.美国镍基高温合金[M].北京:科学出版社,1978 |
| [13] | 訾凯崧,关占群.用铝高速钢加工高温合金（GH698）[J].汽轮机技术,2004(02):154-154,156. |
| [14] | Liao Y S;Shiue R H .Carbide tool wear mechanism in turning of Inconel 718 superalloy[J].WEAR,1996,193(1):16-24. |
| [15] | 金狂浩,陈康华,祝昌军,王云志,刘敏,王社权.硬质合金基体对涂层刀具高速切削镍基高温合金切削性能的影响[J].粉末冶金材料科学与工程,2012(04):437-443. |
| [16] | Ducros C.;Benevent V.;Sanchette E. .Deposition, characterization and machining performance of multilayer PVD coatings on cemented carbide cutting tools[J].Surface & Coatings Technology,2003(0):681-688. |
| [17] | Fox-Rabinovich GS;Yamamoto K;Kovalev AI;Veldhuis SC;Ning L;Shuster LS;Elfizy A .Wear behavior of adaptive nano-multilayered TiAlCrN/NbN coatings under dry high performance machining conditions[J].Surface & Coatings Technology,2008(10):2015-2022. |
| [18] | Abhay Bhatt;Helmi Attia;R. Vargas;V. Thomson .Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718[J].Tribology International,2010(5/6):1113-1121. |
| [19] | Childs T.Metal machining:theory and applications[M].Butterworth-Heinemann,2000 |
| [20] | Jianxin D;Lili L;Jianhua L et al.Failure mechanisms of TiB2 particle and SiC whisker reinforced Al2O3 ceramic cutting tools when machining nickel-based alloys[J].INTERNATIONAL Journal OF MACHINE TOOLS & MANUFACTURE,2005,45(12-13):1393-1401. |
| [21] | J. M. Zhou;V. Bushlya;J. E. Stahl .An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools[J].Journal of Materials Processing Technology,2012(2):372-384. |
| [22] | J. P. Costes;Y. Guillet;G. Poulachon;M. Dessoly .Tool-life and wear mechanisms of CBN tools in machining of Inconel 718[J].International Journal of Machine Tools & Manufacture: Design, research and application,2007(7/8):1081-1087. |
| [23] | Machining of high performance workpiece materials with CBN coated cutting tools[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2009(5):1451. |
| [24] | Bushlya V;Zhou J;St/hl J E .Effect of cutting conditions on machinability of superalloy inconel 718 during high speed turning with coated and uncoated pcbn tools[J].Procedia CIRP,2012,3:370-375. |
| [25] | 王新永,于启勋,庞思勤.高温合金切削中刀具的合理选用[J].航空制造技术,2008(23):52-55. |
| [26] | R. M. Arunachalam;M. A. Mannan;A. C. Spowage .Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools[J].International Journal of Machine Tools & Manufacture: Design, research and application,2004(9):879-887. |
| [27] | Coelho R T;Silva L R .Some effects of cutting edge preparation and geometric modifications when turning INCONEL 718 at high speeds[J].Journal of Materials Processing Technology,2004,148:147-153. |
| [28] | Altin A;Nalbant M;Taskesen A .The effects of cutting speed on tool wear and tool life when machining inconel718 with ceramic tools[J].Materials and Design,2007,28(9):2518-2522. |
| [29] | E.G. Ezugwu;J. Bonney;D.A. Fadare .Machining of nickel-base, Inconel 718, alloy with ceramic tools under finishing conditions with various coolant supply pressures[J].Journal of Materials Processing Technology,2005(0):609-614. |
| [30] | R. S. Pawade;Suhas S. Joshi;P. K. Brahmankar;M. Rahman .An investigation of cutting forces and surface damage in high-speed turning of Inconel 718[J].Journal of Materials Processing Technology,2007(0):139-146. |
| [31] | D.G. Thakur;B. Ramamoorthy;L. Vijayaraghavan .Study On The Machinability Characteristics Of Superalloy Inconel 718 During High Speed Turning[J].Materials & design,2009(5):1718-1725. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%