对圆珠笔头用新型高铬硫系铁素体易切削不锈钢冷拉线材的微观组织与力学性能进行了研究.结果表明,钢中易切削相为MnS、Pb及其与Te形成的复合夹杂物,均呈细小球状或椭球形沿拉拔方向断续、串链状分布.MnS夹杂物大小横向约1μm,纵向约10μm.钢中Cr、Mo的碳化物对改善MnS夹杂物形态有显著作用.该钢成品线材基体组织为细小铁素体晶粒,晶粒度约为10级,力学性能与进口同类钢线材相近,作为替代进口材料,其用于制造圆珠笔头,具有良好的切削性能,能满足生产加工和使用要求,填补了国内空白.
The microstructures and mechanical properties of cold pull wire of a new type ferritic free-cutting stainless steel used in ball pen with high-chromium and sulfur are studied.The results show that the free-cutting phases(inclusions) of the steels contain MnS,Pb and the composite inclusion consisting of MnS (or Pb) and Te.These free-cutting phases are spherical or elliptical in shape,and distribute along with rolling direction of the steels in form of chains and intermittence.The transverse and lognitudinal size of the MnS inclusions is about 1μm and 10μm,respectively.The Cr carbide and Mo carbide in the steels play a remarkable role in improving shape of MnS inclusion.The finished-product wire of the steels has the ferrite matrix with the grain size of about grade 10,and the mechanical properties are similar to that of import steels for this usage.The steels can replace the import materials and have been used to fabricate ball-point of pens in industrial scale,which have good machinability and meet the requirements of the usage and filled in the domestic gaps.
参考文献
| [1] | 王小红,谢兵,冯仲渝.国内外易切削钢的现状和研究进展[J].特殊钢,2005(04):26-28. |
| [2] | 蒋光辉,古隆建,施哲,陈永.易切削钢现状与发展趋势[J].四川冶金,2006(05):10-14. |
| [3] | 邱雄成;应必烈.LX-24工位笔头自动加工机床及工艺计数要点[J].中国制笔,2006(02):33. |
| [4] | 潘明初.中性墨水与笔头的匹配[J].中国制笔,2007(02):9-12,16. |
| [5] | 超易切削不锈钢"DSR6F"[J].金属功能材料,2002(02):46. |
| [6] | 吴晓春;周宏;吴秀英 等.易切削系非调质塑料模具钢的加工性[J].机械工程材料,1996,20(01):39. |
| [7] | 李为.钢中非金属夹杂物[M].北京:冶金工业出版社,1988 |
| [8] | 上海市机械制造工艺研究所.金相分析技术[M].上海:上海科学技术文献出版社,1987:189. |
| [9] | 项程云.合金结构钢[M].北京:冶金工业出版社,1999 |
| [10] | 封顺怀.80年代国内易切削钢的发展[J].制造技术与机床,1994(07):51. |
| [11] | 毛志强.国内外易切削钢发展概况[J].汽车工艺与材料,2000(02):1. |
| [12] | 刘焕牢.YF45V易切削非调质钢中MnS夹杂物作用机理地研究[J].机械开发,1998(02):25. |
| [13] | 吴晓春;崔昆 .非调质塑料模具钢中易切削相的分析[J].钢铁研究学报,1997,9(06):23. |
| [14] | 郑文虎;张玉林;詹明荣.难切削材料加工技术问答[M].北京:北京出版社,2001 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%