以二硼化锆、硅和活性碳为原材料,在1850℃、20 MPa条件下,采用反应热压烧结工艺制备出了SiC/ZrB2陶瓷基复合材料.研究了添加剂(硅和活性碳)含量对ZrB2陶瓷烧结行为和力学性能的影响.借助X射线衍射和扫描电镜分析了复合材料的物相组成和微观结构.研究结果表明:添加剂可以显著提高复合材料的烧结致密度和力学性能.复合材料的XRD衍射图谱中只有ZrB2和SiC的衍射峰.当添加剂含量为12wt％时,复合材料的弯曲强度和断裂韧性分别达到584MPa和7.25MPa ·m1/2.显微结构分析表明,致密度的提高、晶粒粒径的减小以及断裂模式的转变是复合材料力学性能提高的主要原因.
参考文献
| [1] | 宋杰光,王芳,徐明晗,杜大明,鞠银燕,李世斌,纪岗昌,张联盟.包裹型Al（OH）3-Y（OH）3/ZrB2复合粉体的合成工艺优化研究[J].人工晶体学报,2013(07):1453-1456. |
| [2] | Monteverde F;Bellosi A;Scatteia L .Processing and properties of ultra-high temperature ceramics for space applications[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):415-421. |
| [3] | Wei-Ming Guo;Guo-Jun Zhang .Oxidation resistance and strength retention of ZrB_2- SiC ceramics[J].Journal of the European Ceramic Society,2010(11):2387-2395. |
| [4] | 周长灵,程之强,王英姿,高冬云,孙成功,陈达谦.无压烧结硼化锆基ZrB2-SiC复相陶瓷的结构与性能[J].硅酸盐通报,2006(02):16-18,26. |
| [5] | 宋杰光,罗红梅,杜大明,鞠银燕,叶军,李世斌,张联盟.二硼化锆陶瓷材料的研究及展望[J].材料导报,2009(03):43-46,52. |
| [6] | 冉松林,汪德文,Huang Shui-gen,Vander BiestOmer,Vleugels Jef.以MH2（M=Ti,Zr）为原料反应烧结制备MB2-SiC复相陶瓷[J].人工晶体学报,2013(04):732-736. |
| [7] | Adam L. Chamberlain;William G. Fahrenholtz;Gregory E. Hilmas .Pressureless Sintering of Zirconium Diboride[J].Journal of the American Ceramic Society,2006(2):450-456. |
| [8] | Zhu S;Fahrenholtz WG;Hilmas GE;Zhang SC .Pressureless sintering of zirconium diboride using boron carbide and carbon additions[J].Journal of the American Ceramic Society,2007(11):3660-3663. |
| [9] | Gasch M;Ellerby D;Irby E;Beckman S;Gusman M;Johnson S .Processing, properties and arc jet oxidation of hafnium diboride/silicon carbide ultra high temperature ceramics[J].Journal of Materials Science,2004(19):5925-5937. |
| [10] | Opila E;Levine S;Lorincz J .Oxidation of ZrB2- and HfB2-based ultra-high temperature ceramics: Effect of Ta additions[J].Journal of Materials Science,2004(19):5969-5977. |
| [11] | Monteverde F.;Guicciardi S.;Bellosi A. .Advances in microstructure and mechanical properties of zirconium diboride based ceramics[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):310-319. |
| [12] | Sumin Zhu;William G. Fahrenholtz;Gregory E. Hilmas;Shi C. Zhang .Pressureless sintering of carbon-coated zirconium diboride powders[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1-2):167-171. |
| [13] | William G. Fahrenholtz;Gregory E. Hilmas;Shi C. Zhang .Pressureless Sintering of Zirconium Diboride: Particle Size and Additive Effects[J].Journal of the American Ceramic Society,2008(5):1398-1404. |
| [14] | Wei, K.;Ma, W.;Yang, B.;Liu, D.;Dai, Y.;Morita, K. .Study on volatilization rate of silicon in multicrystalline silicon preparation from metallurgical grade silicon[J].Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,2011(7):749-754. |
| [15] | 冯伦,王海龙,范冰冰,陈建宝,许红亮,陈德良,卢红霞,张锐.二硼化锆陶瓷增韧技术的研究进展[J].硅酸盐通报,2011(04):834-839. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%