以BaTiO3、CYD128型环氧树脂、丁腈橡胶和4,4-二氨基二苯基砜为原料,采用共混法制备了具有高介电常数和低介电损耗性能的BaTiO3/环氧复合材料.实验结果表明,环氧树脂中添加BaTiO3后,介电常数从4提高到25,介电损耗从0.4%提高到0.7%.丁腈橡胶的加入使复合材料的介电常数进一步提高到41,介电损耗提高到1.7%,体积电阻率降低到1×1011Ω,击穿强度保持在8kV/mm.Lichtenecker模型计算表明,环氧树脂中BaTiO3的有效介电常数为343,丁腈橡胶为138.
A kind of BaTiO3/epoxy composite material with high dielectric constant and low dielectric dissipation was prepared by mixing method. The composite was prepared with BaTiO3, epoxy resin CYD128, 4, 4-diaminodiphenyl sulphone and nitrile-butadiene rubber. Experimental results indicated that BaTiO3 could increase dielectric constant of the epoxy resin from 4 to 25, and dielectric dissipation factor from 0.4% to 0.7%. Nitrile-butadiene rubber increased the dielectric constant of the BaTiO3/epoxy composite from 25 to was 343 and the nitrile-butadiene rubber was 138 in the epoxy resin matrix. A new method of preparation embedded capacitor with low cost industrially was explored.
参考文献
| [1] | Yang Rao;Jireh Yue;C P Wong;High K.Polymer-ceramic Nanocomposite Development,Characterization,and Modeling for Embedded Capacitor RF Application[A].Piscataway,USA:IEEE,2001:1408-1412. |
| [2] | Lianhua Fan;Yang Rao;C Tison;K S Moon,S V Pothukuchi,C P Wong.Processability and performance enhancement of high K polymer-ceramic nano-composites[A].Piscataway,USA:IEEE,2002:120-126. |
| [3] | 李曹,刘孝波.聚合物/无机复合材料在介电材料领域的应用[J].材料导报,2003(08):68-70,73. |
| [4] | 栾伟玲,高濂,郭景坤.超细BaTiO3陶瓷晶粒尺寸对介电性能的影响[J].硅酸盐学报,1999(01):84-88. |
| [5] | Yang Rao;C P Wong;Jianmin Qu.Self-consistent model for dielectric constant prediction of polymer-ceramic composite[A].Reston,USA:IEEE,2000:44-49. |
| [6] | 蔡政,卢文庆.不同晶粒尺寸BaTiO3粉体的介电性[J].化工时刊,2003(08):18-21. |
| [7] | Qin Huaide.Synthetic Rubber[M].北京:化学工业出版社,1988:314. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%