对泡沫铝合金部分填充方形铝管三点弯曲性能进行研究.研究发现:泡沫铝部分填充管承受的弯曲载荷和吸收的能量与空铝管相比有显著的提高,变形模式从单褶皱模式变为多褶皱模式;泡沫铝部分填充管承载能力和能量吸收能力随着泡沫铝孔隙率的减少而提高,但是达到极限载荷的位移变短;与全填充管相比,泡沫铝部分填充管仍然可以承受较高的载荷,同时有效降低结构的总质量,只有当填充长度大于有效填充长度时,泡沫铝提高铝管承载能力的作用才能充分发挥;部分填充管对空铝管的弯曲载荷相对提高量随铝管壁厚减小而增大.
The bending property of aluminum tubes partially filled with aluminum-foam was studied in the three-point bending experiment.The results indicate that the bending load and absorbed energy of partially foam-filled tube significantly increase and the deformation mode changes from single-fold model to multi-fold model when compared with empty tube.The bending carrying capacity and energy absorption capacity of partially foam-filled tube increase with the decrease of aluminum foam porosity,but the displacement to the max load is shorted.Compared with fully foam-filled tube,not only does the bending load of partially foam-filled tube increase,but also the total weight of the structure drops.Only when the filling length is longer than the efficient filling length,the bending load of the aluminum tubes filled with foam increases rapidly.The relatively increasing value of load increases with the decrease of wall thickness of aluminum tube.
参考文献
| [1] | Gibson L J;Ashby M F.Cellular solids:structure and properties[M].Oxford:pergamon Press,1997:145-148. |
| [2] | John Banhart .Manufacture, characterization and application of cellular Metals and metal foams[J].Progress in materials science,2001(6):559-632. |
| [3] | Ashby M F;Evans A G;Fleck N A.Metal foams:a design guide[M].北京:冶金工业出版社,2006 |
| [4] | 杜星文;宋宏伟.圆柱壳冲击动力学及耐撞性设计[M].北京:科学出版社,2004 |
| [5] | Guden M;Kavi H .Quasi-static axial compression behavior of constraint hexagonal and square-packed empty and foam-filled aluminum multi-tubes[J].Thin-Walled Structures,2006,44:739-750. |
| [6] | A. G. Hanssen;M. Langseth;O. S. Hopperstad .Static crushing of square aluminium extrusions with aluminium foam filler[J].International Journal of Mechanical Sciences,1999(8):967-993. |
| [7] | Shahbeyk S;Vafai A;Petrinic N .Axial crushing of metal foamfilled square columns:Foam density distribution and impactor inclination effects[J].Thin-Walled Strctures,2005,43:1818-1830. |
| [8] | Amkee Kim;Seong-Sik Cheon;Md Anwarul Hasan;Seong-Seock Cho .Bending Behavior of Thin-walled Cylindrical Tube Filled with Aluminum Alloy Foam[J].Key engineering materials,2004(1):46-51. |
| [9] | Sigit Santosa;Tomasz Wierzbicki .Effect of an ultralight metal filler on the bending collapse behavior of thin-walled prismatic columns[J].International Journal of Mechanical Sciences,1999(8):995-1019. |
| [10] | Santosa S.;Wierzbicki T.;Banhart J. .Experimental and numerical analyses of bending of foam-filled sections[J].Acta Mechanica,2001(1/4):199-213. |
| [11] | Santosa S;Banhart J;Wierzbicki T .Bending crushing resistance of partially foam-filled sections[J].Advances in Engineering Materials,2000,2(04):223-227. |
| [12] | H.R. Zarei;M. Kroeger .Bending behavior of empty and foam-filled beams: Structural optimization[J].International journal of impact engineering,2008(6):521-529. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%