采用等温处理法对半固态Sn-15wt.%Pb合金电导率与等温温度、等温时间之间的关系,以及电导率与其微观组织结构之间的关系进行了研究.结果表明:在等温热处理过程中,等温温度为193℃等温时间为60分钟时,其电导率σ约为0.5204×104(Ω-1m-1),合金微观组织处于相对最佳状态.因此,加工时可以将半固态Sn-15wt.%Pb合金的导电率σ控制在0.5204 × 104(Ω-1m-1)左右,以获得半固态Sn-15wt.%Pb合金良好的微观组织结构.
参考文献
[1] | [OL].http.//www.metallurgy nist.gov/techactv1995/intpromat html |
[2] | B W Choi;K P Dharmasena;H N G Wadley.Proc.. Eddy Current Sensing of Vertical Bridgman Semiconductor Crystal Growth of SPIE[A].Scottsdale,AZ,1996:107-118. |
[3] | 刘祥.铸造合金力学及物理性能[M].北京:机械工业出版社,1982 |
[4] | S Ji;Z Fan;M J Bevis .Semi-solid processing of engineering alloys by a twin-screw rheomoulding process[Z].Department of Materials Engineering, Brunel University, Uxbridge, Middlesex UB8 revised,2000. |
[5] | Hard S C;Voorhess P W .Ost wald. ripening in a system with a high volume fraction of coarsening phase[J].Metallurgical and Materials Transactions,1988,19A:2712-2721. |
[6] | WangJL;SuYH;Tsao C Y A .Structural evolution of conventional cast dendritic and spray-cast non-dendritic structures during othermal holding is in the semisolid state[J].seripta Materialia,1997,37(12):2003-2007. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%