Mechanical properties of iron matrix composites reinforced by different types of ceramic particles (SiC,Cr3C2, TiC and Ti (C, N)) prepared by the two- stage resistance sintering were studied experimentally. It was found that tensile strength of SiC/Fe composite shows the highest among the four types of composites. The elongation of all the composites decreases as increasing of reinforcement volume fraction. The stress - strain curves of the composites were simulated by Eshelby approach modeling to reveal the strengthening mechanisms. The modeling and microstructure observations suggest that the strengthening mechanism of the iron matrix composites relies not only on load sharing of the reinforcements but also on reinforcement increasing matrix strength.
参考文献
| [1] | Ibrahim I A;Mohamed F A;Lavemia E J .Particulate reinforced metal matrix composites -a review[J].Journal of Mater Sci A,1991,26:1137-1156. |
| [2] | A. Rabiei;L. Vendra;T. Kishi .Fracture behavior of particle reinforced metal matrix composites[J].Composites, Part A. Applied science and manufacturing,2008(2):294-300. |
| [3] | Pelleg, J .Reactions in the matrix and interface of the Fe-SiC metal matrix composite system[J].Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing,1999(1-2):225-241. |
| [4] | M. Rosso .Ceramic and metal matrix composites: Routes and properties[J].Journal of Materials Processing Technology,2006(1/3):364-375. |
| [5] | 杨玉芳,宗亚平,王刚,徐娜.电流直加热动态热压烧结制备SiCp/Fe复合材料[J].材料研究学报,2007(01):67-71. |
| [6] | Gang Wang;Yufang Yang;Yaping ZONG .A Study on Manufacture of SiCp/Fe Composites by Specimen Current Heating Hot Press Sintering[J].Materials Science Forum,2007(1):705-708. |
| [7] | Wang Y M;Zong Y P;Yang Y F.SiC particulate reinforced iron matrix composites processed by current heating hot press sintering[A].San Francisco:Minerals,Metallurgy and Materials Society,2008:395-401. |
| [8] | Bandyopadhyay T K;Das K .Synthesis and characterization of TiC -reinforced iron -based composites Part Ⅱ on mechanical characterization[J].Journal of Materials Science,2004,39:6503-6508. |
| [9] | Wang Yisan;Ding Yichao;Wang Jing .In situ production of vanadium carbide particulates reinforced iron matrix surface composite by cast-sintering[J].Materials & Design,2007(7):2202-2206. |
| [10] | Anal A;Bandyopadhyay T K;Das K J .Synthesis and characterization of TiB2-reinforced iron-based composites[J].Journal of Materials Processing Technology,2006,172:70-76. |
| [11] | Tan MZ.;Li ZH.;Zong BY.;Xin QB. .Influence of SiC and Al2O3 particulate reinforcements and heat treatments on mechanical properties and damage evolution of Al-2618 metal matrix composites[J].Journal of Materials Science,2001(8):2045-2053. |
| [12] | Xu N;Zong BY .Stress in particulate reinforcements and overall stress response on aluminum alloy matrix composites during straining by analytical and numerical modeling[J].Computational Materials Science,2008(4):1094-1100. |
| [13] | Zong Y P;Wang Y M;Li J et al.Modeling of mechanical behavior and design of microstructure on particulate reinforced materials[J].International Journal of Modern Physics B-Cosmology and Nuclear Physics,2009,23:1627-1633. |
| [14] | Kaye G W C;Laby T H.Tables of physical and chemical constants and some mathematical[M].London:longman Group Ltd,1986:31-105. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%