连铸初始凝固区域传热研究进展

材料与冶金学报, 2007, 6(2): 113-117. doi: 10.3969/j.issn.1671-6620.2007.02.008

连铸初始凝固区域传热研究进展

张兴武 ^1, , 华骏山 ^2, , 王恩刚 ^3, , 赫冀成 ^4,

1.东北大学,材料电磁过程教育部重点实验室,沈阳,110004

2.东北大学,材料电磁过程教育部重点实验室,沈阳,110004

3.东北大学,材料电磁过程教育部重点实验室,沈阳,110004

4.东北大学,材料电磁过程教育部重点实验室,沈阳,110004

关键词：连铸 , 初始凝固 , 弯月面 , 传热 , 电磁连铸

Recent development of heat transfer during initial solidification in continuous casting

连铸初始凝固阶段的传热决定了初始凝固坯壳的形成,讨论了初始凝固坯壳的两大形成机理,探讨了初始凝固阶段的传热行为,分析了连铸中各种因素对初始凝固阶段传热的影响,进一步解释了电磁连铸技术对初始凝固传热的改善.

参考文献

[1]	Takeuchi E;Brimacombe J K .The formation of oscillation marks in the continuous casting of steel slabs[J].Metallurgical Transactions B,1984,15B(09):493-509.
[2]	Lainea E;Busturia J C l.The ELV solidification model in continuous casting billets moulds using casting power[A].Florence,Italy,1991:1621-1631.
[3]	Saucedo I G.Early solidification during the continuous casting of steel[A].:79-89.
[4]	Savage J .A new reciprocation mould cycle to improve surface quality of continuous casting steel[J].Iron and Coal Trade Re,1961,182(04):787-795.
[5]	Edward S. Szekeres .Overview of mold oscillation in continuous casting[J].Iron and Steel Engineer,1996(7):29-37.
[6]	Samarasekera I V;Anderson D L;Brimacombe J K.Thermal and mechanical behaviour of continuous-casting billet mould[J].Ironmaking and Steelmaking,1982(01):1-15.
[7]	Mills K C;Fox A B;Li Z .Performance and properties of mould fluxes[J].Ironmaking and Steelmaking,2005,32(01):27-34.
[8]	陈栋梁;杨文改;干勇等.连铸弯月面区域凝固传热的数值仿真研究[J].钢铁,1997,32(08):26-29.
[9]	蔡开科.浇注和凝固[M].北京:冶金工业出版社,1987
[10]	雷作胜,任忠鸣,张邦文,邓康.连铸结晶器弯月面区温度波动的模拟研究[J].上海大学学报(自然科学版),2002(04):317-320.
[11]	J.W.Cho .Heat Transfer across Mold Flux Film in Mold during Initial Solidification in Continuous Casting of Steel[J].ISIJ International,1998(8):834-842.
[12]	成泽伟,陈伟庆,李联生,于平,姚家华.保护渣性能对结晶器内传热的影响[J].北京科技大学学报,2003(06):524-527.
[13]	Vieria F B.Methodology for selection of mould fluxes for continuous casting of medium carbon and stainless steels slabs[A].,2002:165-173.
[14]	蔡开科.连续铸钢[M].北京:科学出版社,1990
[15]	Hideo MIZUKAIMI .Initial Solidification Behavior of Ultra Low, Low and Middle Carbon Steel[J].ISIJ International,1999(12):1262-1269.
[16]	荆德君,刘中柱,蔡开科.包晶相变对连铸坯初生坯壳凝固收缩的影响[J].钢铁研究学报,1999(03):9-13.
[17]	于功利,井上健,安中弘行.钢水流动对连铸坯初期凝固的影响[J].钢铁,1998(04):0.
[18]	于功利;井上健;安中弘行等.连铸坯初期凝固行为的模拟分析[J].钢铁,1997,32(07):21-23.
[19]	于光伟,贾光霖,王恩刚,赫冀成,张永杰,陈兆平.方坯软接触电磁连铸初始凝固区高频磁场的分布[J].金属学报,2002(02):208-214.
[20]	那贤昭,王锡钢,张兴中,干勇.软接触电磁连铸过程中结晶器及初生坯壳的传热[J].钢铁研究学报,2005(05):31-34,47.
[21]	任忠鸣;董华锋;邓康等.软接触结晶器电磁连铸中初始凝固的基础研究[J].金属学报,1999,35(08):851-855.
[22]	Toh T;Tacheuchi E;Sakane J.[A].Nagoya,ISIJ,1994:254.
[23]	那贤昭,王锡钢,张兴中,干勇.高频磁场作用下软接触电磁连铸初生坯壳的变形行为[J].钢铁研究学报,2004(06):21-26.
[24]	Miyoshino I .Influence of electromagnetic pressure on the early solidification in a continuous casting mold[J].ISIJ International,1989,29(12):1040-1047.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

连铸初始凝固区域传热研究进展

Recent development of heat transfer during initial solidification in continuous casting

参考文献