欢迎登录材料期刊网

材料期刊网

高级检索

通过硬度测试、透射电镜图像和X射线衍射图谱分析,研究了6063铝合金在压缩变形过程中的显微组织和性能变化.结果表明:在压缩变形初期,6063铝合金在过饱和态,峰时效态和过时效态的硬度均呈近似直线上升,它们的硬化能力按下列顺序降低:峰时效、过饱和态、过时效.出现硬度下降后,压缩率则按上列顺序增大.强塑性变形过程中出现析出相析出和回溶有利于降低加工硬化引起的脆性.

参考文献

[1] D.H. Shin;I. Kim;J. Kim .Microstructure development during equal-channel angular pressing of titanium[J].Acta materialia,2003(4):983-996.
[2] May J;Hoppel HW;Goken M .Strain rate sensitivity of ultrafine-grained aluminium processed by severe plastic deformation[J].Scripta materialia,2005(2):189-194.
[3] Krasilnikov N;Lojkowski W;Pakiela Z;Valiev R .Tensile strength and ductility of ultra-fine-grained nickel processed by severe plastic deformation[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):330-337.
[4] T. Hebesberger;H.P. Stuwe;A. Vorhauer .Structure of Cu deformed by high pressure torsion[J].Acta materialia,2005(2):393-402.
[5] 许晓嫦,刘志义,谭曼玲,刘跃军,吴纯.时效析出相在强变形过程中的室温回归现象[J].材料热处理学报,2004(06):71-75.
[6] 许晓嫦,刘志义,党朋,谭曼玲.室温强塑性变形下回溶和再析出的机理研究[J].材料科学与工艺,2005(02):178-181.
[7] Gutierrez-Urrutia I;Munoz-Morris MA;Morris DG .The effect of coarse second-phase particles and fine precipitates on microstructure refinement and mechanical properties of severely deformed Al alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):399-410.
[8] Murayama M;Horita Z;Hono K .Microstructure of two-phase Al-1.7 at% Cu alloy deformed by equal-channel angular pressing[J].Acta Materialia,2001,49:41-29.
[9] Liu Z Y;Liang G X;Wang E D.Effect of equal channel angular pressing on structure of Al alloy 2024[J].Transactions of Nonferrous Metals Society of China,1997(07):160-162.
[10] Uniu N;Gable B M;Shiflet G J.The effect of cold work on the precipitation of Ω and θ′ in a ternary Al-Cu Mg alloy[J].Materials Science Forum,2002:396-402;801-806.
[11] Esmaeill S;Wang X;Lloyd D J et al.On the precipitation-hardening behavior of the 6063-Cu alloy AA6111[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2003,34:751-763.
[12] Prangnell P H;Bowen J R;Apps P J .Ultra-fine grain structure in aluminum alloys be severe deformation processing[J].Materials Science and Engineering A,2004,375-377:178-185.
[13] Genki Sakai;Zenji Horita;Terence G. Langdon .Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):344-351.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%