为了提高材料在含磨粒油润滑条件下的摩擦磨损性能,制备了n-Al2O3/Ni电刷镀复合镀层,采用扫描电镜观察了镀层的表面和截面组织以及纳米颗粒在复合镀层中的分布,以GC订5钢为对摩件对比了复合镀层与快速镍刷镀层以及45钢的摩擦磨损性能,并且对磨损试样表面的形貌和成分进行了分析.结果发现,纳米颗粒的加入细化了镀层组织,改善了镀层与基体的结合,提高了镀层的硬度;材料在含细沙油润滑条件下的磨损量与时间呈线性关系,复合镀层的摩擦系数和磨损量小于快速镍镀层和45钢.
参考文献
| [1] | Juha Miettinen;Peter Andersson .Acoustic emission of rolling bearings lubricated with contaminated grease[J].Tribology International,2000(11):777-787. |
| [2] | R. S. Dwyer-Joyce .Predicting the abrasive wear of ball bearings by lubricant debris[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1999(0):692-701. |
| [3] | KHONSARI M M;Wang S H .On the role of particulate contamination in scuffing failure[J].Wear,1990,137:51-62. |
| [4] | 徐滨士,董世运,马世宁,王红美.n-Al2O3P/Ni复合刷镀层的组织和摩擦磨损特性[J].材料保护,2002(06):6-8. |
| [5] | 张玉峰.（Ni-P）-纳米Si3N4微粒复合刷镀工艺研究[J].电镀与精饰,2001(06):5-7. |
| [6] | Jaroslaw Sep;Anna Kucaba-Pietal .Experimental testing of journal bearings with two-component surface layer in the presence of an oil abrasive contaminant[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(12):1090-1095. |
| [7] | Wikstrom V;Hoglund E;Larsson R .Wear of bearing liners at low speed rotation of shaft with contaminated oil[J].Wear,1993,162-164:996-1001. |
| [8] | 解培民.快速镍镀层在含磨粒油润滑条件下的摩擦磨损性能研究[J].工程机械,1994(09):19-20. |
| [9] | 胡树兵,李志章,梅志,叶先运.电刷镀Ni-W过渡层与离子镀TiN复合涂层的结合力和磨损特性[J].金属热处理学报,2000(04):62-67. |
| [10] | 徐龙堂,徐滨士,周美玲,马世宁,张伟.电刷镀镍/镍包纳米Al2O3颗粒复合 镀层微动磨损性能研究[J].摩擦学学报,2001(01):24-27. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%