采用自制的碳分子筛，制造了填充碳分子筛的硅橡胶(PDMS)膜，研究了膜对含苯的稀水溶液的渗透蒸发的分离性能.考察了填充剂、料液浓度等因素对膜的分离性能的影响.
Filling-type polydimethylsiloxane (PDMS) membranes were prepared by the incorporation of carbon molecular sieves (CMS) from different precursors into the casting solutions. The pervaporative removal of benzene from aqueous solution was carried out using the selectivity and flux as the evaluation factors. The effects of the type and structures of CMS and the feed concentrations on the membrane performance were thoroughly investigated.
参考文献
| [1] | Hennepe H J C;Bargeman D;Mulder M H V.Zeolite-filled silicone rubber membranes.Part 1.Membrane preparation and pervaporation results[J].Journal of Membrane Science,1987:39-55. |
| [2] | Duval J M;Folkers B;Mulder M H V.Separation of a toluene/ethanol mixture by pervaporation using active carbonfilled polymeric membranes[J].Separation Science and Technology,1994(03):357-373. |
| [3] | Ji WC.;Hwang ST.;Sikdar SK. .SORPTION, DIFFUSION AND PERMEATION OF 1,1,1-TRICHLOROETHANE THROUGH ADSORBENT-FILLED POLYMERIC MEMBRANES[J].Journal of Membrane Science,1995(3):243-255. |
| [4] | Lloyd D R;Meluch T B.Materials science of synthetic membranes[J].American Chemical Society,1985:44-48. |
| [5] | Smart J.;Lloyd DR.;Schucker RC. .Pervaporative extraction of volatile organic compounds from aqueous systems with use of a tubular transverse flow module. Part I. Composite membrane study[J].Journal of Membrane Science,1998(1/2):137-157. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%