欢迎登录材料期刊网

材料期刊网

高级检索

为提高树脂基摩擦材料摩擦因数稳定性,改善其抗热衰退性能.以碳纤维作为增强纤维,采用热压成型工艺制备碳纤维增强树脂基摩擦材料;用XD-MSM型定速摩擦试验机测定摩擦磨损性能,研究了不同含量碳纤维增强对树脂基摩擦材料摩擦磨损性能的影响;利用VK-X200三维激光扫描显微镜观察了摩擦材料磨损后表面的微观形貌并探讨其磨损机理.结果表明,碳纤维增强树脂基摩擦材料的硬度、压缩强度和剪切强度均得到提高,并随碳纤维含量的增加而逐渐增大;碳纤维增强作用提高了树脂基摩擦材料的耐磨性和摩擦因数的稳定性,改变了树脂基摩擦材料的摩擦磨损形式;碳纤维含量为4wt%的增强树脂基摩擦材料摩擦因数稳定性较高,抗热衰退性能较好,磨损机制主要为疲劳磨损.

参考文献

[1] 丛培红;吴行阳;卜娟;李同生.制动用有机摩擦材料的研究进展[J].摩擦学学报,2011(1):88-96.
[2] S. Betancourt;J. Cruz;A. Toro.Friction and wear in sliding contact of cast iron against phenolic resin composites reinforced with carbonaceous fibres from plantain fibre bundles[J].Lubrication Science,20132(2):163-172.
[3] The application of PEEK in stainless steel fiber and carbon fiber reinforced composites[J].Composites, Part B. Engineering,20084(4):p.585-591.
[4] 章伟 .碳纤维和钢纤维混杂增强摩擦材料研究[D].华东理工大学,2014.
[5] Hua Fu;Li Fu;Guang-lei Zhang;Rui-min Wang;Bo Liao;Bao-chen Sun.Abrasion Mechanism of Stainless Steel/Carbon Fiber-Reinforced Polyether-Ether-Ketone (PEEK) Composites[J].Journal of Materials Engineering and Performance,20097(7):973-979.
[6] 陈燕;葛恩德;傅玉灿;苏宏华;徐九华.碳纤维增强树脂基复合材料制孔技术研究现状与展望[J].复合材料学报,2015(2):301-316.
[7] Jie Fei;He-Jun Li;Ye-Wei Fu;Le-Hua Qi;Yu-Lei Zhang.Effect of phenolic resin content on performance of carbon fiber reinforced paper-based friction material[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,20107/8(7/8):534-540.
[8] U. S. Hong;S. L. Jung;K. H. Cho;M. H. Cho;S. J. Kim;H. Jang.Wear mechanism of multiphase friction materials with different phenolic resin matrices[J].Wear,20097/8(7/8):739-744.
[9] 王璐;苏堤.偶联剂改性硅灰棉对树脂基摩擦材料摩擦学性能的影响[J].粉末冶金材料科学与工程,2014(1):71-76.
[10] Gewen Yi;Fengyuan Yan.Mechanical and tribological properties of phenolic resin-based friction composites filled with several inorganic fillers[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,20071/2(1/2):121-129.
[11] 朱文婷;付业伟;李贺军;费杰;张兆民.硅酸钙颗粒改性树脂基摩擦材料的性能[J].润滑与密封,2012(11):45-50.
[12] 马小龙;敖玉辉;肖凌寒;董景隆;张会轩.表面改性对碳纤维/酚醛树脂基复合材料摩擦性能的影响[J].材料研究学报,2015(2):101-107.
[13] Shojaei, Akbar;Arjmand, M;Saffar, A.Studies on the friction and wear characteristics of rubber-based friction materials containing carbon and cellulose fibers[J].Journal of Materials Science,20116(6):1890-1901.
[14] 费杰;李贺军;付业伟;齐乐华;李克智.碳纤维增强纸基摩擦材料磨损机理研究[J].摩擦学学报,2011(6):540-545.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%