采用熔盐反应法在碳纤维表面合成了TiC涂层,研究了涂层制备工艺对涂层厚度、形貌以及碳纤维抗氧化性能的影响.结果表明,碳纤维表面涂覆TiC涂层可以改善其抗氧化性能,使碳纤维的起始氧化失重温度从450℃上升至700℃左右.在850℃下保温1~5 h合成的TiC涂层与碳纤维基体结合较好,碳纤维抗氧化性能随保温时间的增加而增加;在950℃下保温0.5~5 h合成的TiC涂层碳纤维其抗氧化性能随保温时间的增加先增加后下降.
参考文献
[1] | Nakata E;Kagawa Y .Damage of carbon fibre by hightemperature atmospheric exposure and liquid aluminium[J].Journalof Materials Science Letters,1985,4(01):61-62. |
[2] | Baklanova N I;Zima T M;Boronin A I et al.Protective ceramic muhilayer coatings for carbon fibers[J].Surface and Coatings Technology,2006,201(06):2 313-2 320. |
[3] | Noel MS.;Kovar D. .Laser chemical vapor deposition of TiC on tantalum[J].Journal of Materials Science,2002(4):689-697. |
[4] | 谢刚.熔融盐理论与应用[M].北京:冶金工业出版社,1998:1-11. |
[5] | 王玉庆;王作明;周本濂 等.碳纤维涂覆碳化硅的研究[J].复合材料学报,1992,9(01):13-18. |
[6] | 张二林.Al-Ti-C系中反应生成TiC机理研究[J].材料工程,1998(02):3. |
[7] | 姜东梅,吴化,王立新.钢表面氯基熔盐被覆碳化钛工艺[J].吉林工学院学报(自然科学版),2001(01):15-17. |
[8] | Hackl G;Gerhard H;Popovska N .Coating of carbon short fibers with thin ceramic layers by chemical vapor deposition[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2006(1/2):217-222. |
[9] | Ouyang Haibo;Li Hejun;Qi Lehua .Synthesis of a silicon carbide coating on carbon fibers by deposition of a layer of pyrolytic carbon and reacting it with silicon monoxide[J].Carbon: An International Journal Sponsored by the American Carbon Society,2008(10):1339-1344. |
[10] | 高朋召,王红洁,金志浩.SiO2涂层制备工艺对三维碳纤维编织体抗氧化性能的影响[J].无机材料学报,2003(04):849-854. |
[11] | Piquero T.;Vincent C.;Bouix J.;Vincent H. .INFLUENCE OF CARBIDE COATINGS ON THE OXIDATION BEHAVIOR OF CARBON FIBERS[J].Carbon: An International Journal Sponsored by the American Carbon Society,1995(4):455-467. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%