就陶瓷高温活性钎料研制的一些基本原则和要求进行了分析和讨论,以Al2O3、Si3N4这两种典型陶瓷为研究对象,对其钎焊时的界面反应、润湿性能、接头强度等作了综述,并给出了相应高温活性钎料的成分配比、钎焊工艺、接头强度等参数,以供实际钎焊时参考.
参考文献
| [1] | 张奕琦.工程陶瓷/金属高温活性钎焊[C].论文集,1999:214-217. |
| [2] | 陆善平,郭义.(Ni-Ti)/Si<,3>N<,4>、(BNi-2+Ti)/Si<,3>N<,4>界面交互作用及其润湿性[C].第八次全国焊接会议论文摘要集(第1册),1997:1-274～1-276. |
| [3] | 庄鸿寿;罗格夏特 E.高温钎焊[M].北京:国防工业出版社,1989:25. |
| [4] | 庄鸿寿.钎焊手册[M].北京:机械工业出版社,1999:13-14. |
| [5] | 刘联保.陶瓷-金属封接技术指南[M].北京:国防工业出版社,1990 |
| [6] | Elsayed MH.;Schuster JC.;Naka M. .INTERFACIAL STRUCTURE AND REACTION MECHANISM OF ALN/TI JOINTS[J].Journal of Materials Science,1997(10):2715-2721. |
| [7] | El-Sayed MH.;Naka M. .Structure and strength of AlN/V bonding interfaces[J].Journal of Materials Science,1998(11):2869-2874. |
| [8] | 任耀文.真空钎焊工艺[M].北京:机械工业出版社,1993:215. |
| [9] | 熊华平;万传庚;周振丰 .Cu-Ni-Ti 合金钎料对Si3N4陶瓷的润湿和连接[J].金属学报,1999,35(05):527-530. |
| [10] | Chuangeng Wan;Huaping Xiong;Zhengfeng Zhou .oining of Si3N4/Si3N4 with CuNiTiB paste brazing filler metals and interfacial reactions of oints[J].Journal of Materials Science,1999,4(12):3013-3019. |
| [11] | 熊华平.CuNiTiB急冷钎料对Si3N4陶瓷的连接[J].中国有色金属学报,1999(04):764-768. |
| [12] | Mizuhara H;Mally K .Ceramic-to-metal joining with active brazing filler metal[J].Welding Journal,1985,64(10):27-32. |
| [13] | Okamura H .Brazing ceramics to metals[J].Welding International,1993,7(03):236-242. |
| [14] | KANG S;Kim H J .Design of high-temperature brazing alloys for ceramic-metal joints[J].Welding Journal,1995,74(09):289s-295s. |
| [15] | Tillmann W;Lugscheider E;Schlimbach K;Manter C, Indaocher J E. .Heat-resistant active brazing of silicon nitride.Part 2: Metalurgical characterization of the braze joint[J].Welding Journal,1998,77(03):103s-109s. |
| [16] | BANG K S;Liu S .Interfacial reation between alumina and Cu-Ti filler metal during reactive metal brazing[J].Welding Journal,1994,73(03):54S-60S. |
| [17] | R. M. Do Nascimento;A. E. Martinelli .Brazing Al2O3 to sintered Fe-Ni-Co alloys[J].Journal of Materials Science,1999(23):5839-5845. |
| [18] | 西口公之 .活性金属と[A].ラミツクスとの界面にぉけゐ原子间结合状态に关すゐ考察,1993,11(01):126-130. |
| [19] | 万传庚;Kritsalis P;pucos N E .高温钎料PdCu-Ti在氧化铝陶瓷上的润湿性及界面反应[J].焊接学报,1994,15(04):209-213. |
| [20] | 梁超,蒋成禹.Al2O3/Ti-Zr-Fe钎料/Nb界面组织及强度[J].华东船舶工业学院学报,2001(03):51-54. |
| [21] | 朱定一;金志浩;王永兰;浩宏奇 .Al2O3/Ni-Ti钎料反应界面形成的微观机理[J].焊接学报,1998,19(04):94-98. |
| [22] | Karlsson .Metallic oxides with the structure of high-speed steel carbide[J].Nature,1951,168(09):558-563. |
| [23] | M.-F. Wu;Z.-S. Yu;C. Liang .Interfacial microstructure of Al_2O_3/Ti-6Al-4V joints brazed with (Ag_(72)Cu_(28))_(97)Ti_3 filler metal[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2002(3):341-344. |
| [24] | Paiva OC.;Barbosa MA. .PRODUCTION, BONDING STRENGTH AND ELECTROCHEMICAL BEHAVIOUR OF COMMERCIALLY PURE TI/AL2O3 BRAZED JOINTS[J].Journal of Materials Science,1997(3):653-659. |
| [25] | Paiva O C;Barbosa M A .Brazing parameters determine the degradation and mechamical behavior of alumia/titamum brazed oints[J].Journal of Materials Science,2000,35(07):1165-1175. |
| [26] | 吴铭方,于治水,王凤江,祁凯.Al2O3/Cu70Ti25Zr5/Nb界面结构及强度[J].硅酸盐学报,2001(04):335-339. |
| [27] | YU Z S;Wu M F;Liang C;Wang F J,Qi K. .Interfacial morphology and strength of Al2O3/Nb joints brazed with Cu-Ti-Zr filler metal[J].材料科学与工艺(英文版),2002,18(01):99-102. |
| [28] | Fukaya Y;Kobayashi T;Hirai .Joining of Al2O3 and steel using a Cu2O+Cu+Ag-Cu-Ti joining method[J].Welding International,1991,5(03):230-235. |
| [29] | Hosking F M;Cadden C H;Yang N Y C;Glass S J,Stephens J J,Vianco P T,Walker C .Microstructural and mechnical characterizations of actively brazed alumina tensile specimens[J].Welding Journal,2000,78(06):222-230. |
| [30] | W. TILLMANN;E. LUCSCHEIDER;K. SCHLIMBACH;C. MANTER;J. E. INDACOCHEA .Heat-Resistant Active Brazing of Silicon Nitride Part 1: Mechanical Evaluation of Braze Joints[J].Welding Journal,1997(8):300s-304s. |
| [31] | Tillmann W;Lugscheider E;Schlimbach K;Manter C, Indaocher J E. .Heat-resistant active brazing of silicon nitride. part 2: metalurgical characterization of the braze joint[J].Welding Journal,1998,77(03):103s-109s. |
| [32] | Kim D H;Hwang S H;Chun S S .The wetting,reaction and bonding of silicon nitride by Cu-Ti alloys[J].Journal of Materials Science,1991,26(12):3223-3234. |
| [33] | 陆善平;董秀中;吴庆;郭义 .Cu-Ti,Co-Ti,Ti-Zr-Cu高温钎料在氮化硅陶瓷上的润湿性能和界面连接[J].材料研究学报,1998,12(03):295-298. |
| [34] | 吴斌,邹家生,陈铮,赵其章,眭润舟,楼宏青.用Cu-Ni-Ti钎料连接Si3N4陶瓷的试验研究[J].华东船舶工业学院学报,2001(01):82-86. |
| [35] | 熊华平,毛唯,程耀永,李晓红.几种钴基高温钎料对SiC陶瓷的润湿与界面结合[J].金属学报,2001(09):991-996. |
| [36] | Xiong Huaping;Mao Wei;Yao Yong;Li Xiaohong, Wanlin Guo .Effect of elements Cr and Ti in the newly-designed CoFeNi(Si,B)-Cr-Ti system brazing alloys on the wetting behavior of alloys on Si3N4. J[J].Journal of Materials Science Letters,2001,20(18):1681-1684. |
| [37] | Samandi M;Gudze M;Evans P.Aplication of ion implantation to ceramic/metal joining[J].Nuclear Instruments and Methods in Physics Research B:Beam Interaction with Materials and Atoms,1997:669-672. |
| [38] | Naka M;Kubo M;kamoto I .oining of silicon nitride with Al-Cu alloys[J].Journal of Materials Science,1987,22(12):4417-4421. |
| [39] | KANG S;Kim H J .Design of high-temperature brazing alloys for ceramic-metal joints[J].Welding Journal,1995,74(08):289s-295s. |
| [40] | Andrew Cullison .Dissimilar materials jointed by brazing[J].Welding Journal,1999(12):49-50. |
| [41] | Martens L .Strength and microstructure of brazed cemented carbide and silicon nitride oints[J].Journal of Materials Processing Technology,1996,58(12):13-19. |
| [42] | Zhu Minguang;Chung D D L .Improve the strength of brazed oints to alumina by adding carbon fibers[J].Journal of Materials Science,1997,32(20):5321-5333. |
| [43] | C. G. WAN;H. P. XIONG;Z. F. ZHOU .Joining of Si_3N_4 to 1.25Cr0.5Mo Steel Using Rapidly Solidified CuNiTiB Foils As Brazing Filler Metals[J].Welding Journal,1997(12):522s-525s. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%