以双辊连续铸轧薄带工艺凝固过程为基础,同时基于金属凝固的基本原理建立了双辊连铸薄带凝固过程的异质形核模型、修正的枝晶尖端生长动力学模型、柱状晶向等轴晶转变(CET)的解析模型以及基于元胞自动机(CA)的双辊连续铸轧薄带凝固组织演变的仿真模型.数值模拟结果表明,所建立的数学模型能够合理描述t粒沿任意角度生长的过程,温度场、溶质场和微观组织形貌的模拟计算结果合理,同时利用双辊薄带连续铸轧工业纯铝凝固过程验证了数学模拟的可行性.
参考文献
| [1] | Wang, B.;Zhang, J.Y.;Li, X.M.;Qi, W.H. .Simulation of solidification microstructure in twin-roll casting strip[J].Computational Materials Science,2010(Suppl.1):S135-S139. |
| [2] | YANG Ming-bo;PAN Fu-sheng .Analysis about forming mechanism of equiaxed crystal zone for 1CrI8Ni9Ti stainless steel twin-roll thin strip[J].Journal of Materials Proceasing Technology,2009,209:2203-2211. |
| [3] | 王波,张捷宇,张胤,贺友多,樊俊飞,方园,安胜利.双辊薄带连铸过程数学物理模拟研究[J].内蒙古科技大学学报,2008(01):67-72. |
| [4] | 张纬栋,任三兵,杜锋,王波,张立,樊俊飞,张捷宇.双辊薄带连铸布流系统研究[J].过程工程学报,2009(z1):102-106. |
| [5] | MIAO Yu-chuan;ZHANG Xiao-ming;DI Hong-shuang et al.Numerical simulation of the fluid flow,heat transfer,and solidi? cation of twin-roll strip casting[J].Journal of Materials Processing Technology,2006,174:7-13. |
| [6] | Jian Zeng;Roger Koitzsch;Herbert Pfeifer;Bernd Friedrich .Numerical simulation of the twin-roll casting process of magnesium alloy strip[J].Journal of Materials Processing Technology,2009(5):2321-2328. |
| [7] | KURZ W;GIOVANOLA B;TRIVEDI R .Theory of microstructural development during rapid solidification[J].Acta Metallurgica,1986,34(05):823-830. |
| [8] | LEE K;HONG C .Stochastic modeling of solidification grain structure of Al-Cu crystalline ribbons in planar casting[J].ISIJ International,1997,37(01):38-45. |
| [9] | Sanjeev Das;N.S. Lim;J.B. Seol;H.W. Kim;C.G. Park .Effect of the rolling speed on microstructural and mechanical properties of aluminum-magnesium alloys prepared by twin roll casting[J].Materials & design,2010(3):1633-1638. |
| [10] | RAPPAZ M .Probabolic modeling of microstructure formation in solidification process[J].Acta Metallurgica Et Materialia,1993,41(02):345-360. |
| [11] | 胡汉起.金属凝固原理[M].北京:机械工业出版社,1991 |
| [12] | TAKATANI M;GANDIN C A;RAPPAZ M .Ebsd characterisation and modeling of columnar dendritic grains growing in the presence of fluid flow[J].Acta Metallurgica,2000,48(03):675-686. |
| [13] | LIU Xiao-bo,XU Qing-yan,JING Tao,LIU Bai-cheng.Microstructure of aluminum twin-roll casting based on Cellular Automation[J].中国有色金属学会会刊（英文版）,2008(04):944-948. |
| [14] | 王祝堂;田荣璋.铝及其合金加工手册[M].长沙:中南大学出版社,1989 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%