研究非典型等轴细晶的两种不同轧制变形量的Ti3Al基合金热轧板的超塑性变形行为及其变形前后的显微组织.研究结果表明:该合金在超塑性变形过程中组织会转化为有利于超塑性的细小等轴组织.其在变形温度为940～1020℃,应变速率为2×10-4～2×10-3S-1时具有良好的超塑性,其最大伸长率可达859.5％,应变速率敏感指数达0.43,该合金超塑性变形的主要机制是晶界滑动,而且这种非典型等轴细晶条件下超塑性变形时晶内变形以及位错蠕变所起的作用比在等轴细晶态组织条件下的作用更为显著.对非典型等轴细晶的Ti3Al基合金热轧板,无需进行复杂热处理,也可以获得良好的超塑性,更具有工业意义.
参考文献
| [1] | 刘莹莹,姚泽坤,郭鸿镇.Ti3Al金属间化合物超塑性的研究进展[J].材料工程,2008(04):65-69. |
| [2] | LIPSITT H A .Deformation and fracture of Ti3Al at elevated temperatures[J].Met Trans (A),1980,11(08):1369-1376. |
| [3] | SASTRY S M L.Plastic deformation of TiAl and Ti3Al[A].Kyoto,Japan,1980:1231-1242. |
| [4] | DUTTA A;BANERJEE D .Superplastic behavior in a Ti3Al-Nb alloy[J].Scripta Metallurgica et Materialia,1990,24(07):1319-1322. |
| [5] | YANG H S;JIN H S .Superplasticity in Ti3Al-based alloy stabilized by Nb[J].Scripta Metallurgica et Materialia,1991,25:1223-1227. |
| [6] | 孙福生;马济民;曹春晓 .Ti3Al基合金超塑形变的微观观察[J].金属学报(B),1994,30(10):465-B470. |
| [7] | 王斌;贾天聪;王跃群 等.Ti-24Al-14Nb-3V-0.5Mo合金的超塑性[J].金属学报,1994,30(07):B309-B313. |
| [8] | JOBART D;BLANDIN J J .Microstructure and superplasticity of a Ti-25Al-10Nb-3V-1Mo intermetallic alloy[J].Materials Science and Engineering,1996,207:170-180. |
| [9] | DING H;SONG D;ZHANG C B et al.Superplastic behavior of β-forged Ti3Al-Nb alloy[J].Materials Science and Engineering,2000,A281:248-252. |
| [10] | KIM J H;PARK C G;HA T K et al.Microscopic observation of superplastic deformation in α2 phase Ti3Al-Nb alloy[J].Materials Science and Engineering,1999,A269:197-204. |
| [11] | Kim JS;Shin DH;Chang YW;Lee CS .Constitutive analysis on superplastic deformation mechanisms of two-phase Ti3Al-xNb alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):117-125. |
| [12] | K. L. Yang;J. C. Huang;Y. N. Wang .Phase transformation in the β phase of super α_2 Ti_3Al base alloys during static annealing and superplastic deformation at 700-1000 ℃[J].Acta materialia,2003(9):2577-2594. |
| [13] | 王殿梁,丁桦,白秉哲.锻态Ti3Al基合金超塑压缩的力学行为及组织演变[J].稀有金属材料与工程,2001(06):444-447. |
| [14] | 何景素;王燕文.金属的超塑性[M].北京:科学出版社,1986:25-28. |
| [15] | 卡依勃舍夫 O A.金属的塑性和超塑性[M].北京:机械工业出版社,1982:121-136. |
| [16] | 顾家琳,孙新军,白秉哲.旋锻制备超细晶双相钛合金及其超塑性[J].金属学报,2002(z1):378-381. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%