利用Gleeble-3800热力模拟试验机,在1123 ～1423K温度范围,应变速率0.5 ～ 10s-1条件下,对二次硬化超高强度23Co14Ni12Cr3MoE钢进行了高温轴向压缩试验,测得了钢的高温流变曲线,并观察了变形后的显微组织.实验结果表明,该钢流变应力和峰值应变随着变形温度的升高和应变速率的降低而减小；在真应变为0.8,应变速率为0.5～10s-1的条件下,随着变形速率的提高,其发生完全动态再结晶的温度也逐渐升高.当变形速率为10s-1时,其变形温度高于1373K,才会发生完全动态再结晶.23Co14Ni12Cr3MoE钢的热变形激活能(Q)为421.6kJ/mol.本次研究还确立了钢的热变形方程.
参考文献
| [1] | 胡正飞,吴杏芳,王春旭.二次强化高CoNi超高强度合金钢的研究近况[J].钢铁研究学报,2001(04):62-68. |
| [2] | HANDERHAN K J;GARRISON Jr W M;MOODY N R .A comparison of the fracture behavior of two heats of the secondary hardening steel AF1410[J].Metallurgical Transactions A,1989,20(01):105-123. |
| [3] | AYER R;MACHMEIER P .Microstructure basis for the effect of chromium on the strength and toughness of AF1410-based high performance steels[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1996,27(09):2510-2517. |
| [4] | IORIO L E;MALONEY J L;GARRISON Jr W M.The influence of carbon,chromium and molybdenum contents on the tempering behavior of high strength 14cobalt/10nickel secondary hardening steel[A].ISS,1998:901-919. |
| [5] | L.E.IORIO;W.M. GARRISON Jr. .The Effects of Titanium Additions on AF1410 Ultra-High- Strength Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2006(4):1165-1173. |
| [6] | AYER R;MACHMEIER P .On the characteristics of M2C carbides in the peak hardening regime of AerMet100 steel[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,28(03):903-905. |
| [7] | L. E. Iorio;W. M. Garrison Jr. .Effects of gettering sulfur as CrS or MnS on void generation behavior in ultra-high strength steel[J].Scripta materialia,2002(12):863-868. |
| [8] | 赵振业.超高强度钢中二次硬化现象研究[J].航空材料学报,2002(04):46-55. |
| [9] | 李杰,李春志,郭峰,李志,颜鸣皋.二次硬化超高强度钢中析出强化相HRTEM研究[J].航空材料学报,2008(04):1-5. |
| [10] | 李杰,孙枫,李春志,郭峰,李志,颜鸣皋.高Co-Ni超高强度钢强化析出相的微观分析[J].材料工程,2009(07):1-4. |
| [11] | FARAG M M;SELLARS C M .Flow stress in hot extrusion of commercial-purity aluminum[J].Journal of the Institute of Metals,1973,101(05):137-145. |
| [12] | JONAS J J;SELLARS C M;TEGART W J .Strength and structure under hot working conditions[J].lnt Met Rev,1969,130(14):1-24. |
| [13] | ZENER C;HOLLOMOM J H .Effect of strain rate upon the plastic flow of steel[J].Applied Physics,1944,15(01):22-32. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%