欢迎登录材料期刊网

材料期刊网

高级检索

以1,6-六亚甲基二异氰酸酯(HDI)、聚氧化丙烯多元醇(PPG)、3,3/-二氯-4,4/-二氨基二苯甲烷(MOCA)为原料合成了聚氨酯弹性体,并进一步将消烟耐烧蚀反应型填料填充其中制得低烟耐烧蚀聚氨酯弹性材料.系统的研究了软段含量、交联度对产物力学性能的影响.结果表明:随软段长度的增加,HDI型聚醚弹性体的拉伸强度、邵氏硬度和回弹率降低,扯断伸长率增加;随着交联度的增加其扯断伸长率、邵氏硬度降低,拉伸强度则先降低后增加,回弹率却大幅增加.同时研究结果表明填充消烟耐烧蚀反应型填料的HDI型聚醚弹性体不仅具有优异的力学性能,还具有优异的低烟耐烧蚀性能.

The polyurethane elastomer was prepared through the reaction of HDI,PPG and MOCA. And then, the functional filler with smoke suppression and anti-ablation material was doped in to the polyurethane elastomer. The effect of the soft segment length and the crosslinked degree on the mechanical properties of the polyurethane elastomer was investigated in detail. The tensile strength、shore hardness and Spring back rate of the polyurethane elastomer decreased with the increase in the soft segment length. However, the elongation at break increased. At the same time, the results showed that the breaking elongation and shore hardness decreased, and the spring back rate increased with the incrensement of the crosslinked degree. In addition, the polyurethane elastomer containing functional filler has low-smoke and ablation-resistance.

参考文献

[1] 范真祥,程海峰,张长瑞,唐耿平,楚增勇,王军.低成本聚硅氧烷制备SiCf/Si-O-C材料性能研究[J].航空材料学报,2006(02):52-56.
[2] 尹华丽,李东峰,马新刚,林绣荣.白炭黑特性对丁羟衬层力学性能的影响[J].固体火箭技术,2007(06):514-517.
[3] 邹德荣 .低特征信号绝热衬层材料的发展[J].工艺材料,2003,5:61-63.
[4] Mutsuhisa Furukawa;Yoshitaka Mitsui;Tomoya Fukumaru;Ken Kojio .Microphase-separated structure and mechanical properties of novel polyurethane elastomers prepared with ether based diisocyanate[J].Polymer: The International Journal for the Science and Technology of Polymers,2005(24):10817-10822.
[5] Rogulska M;Podkoscielny W;Kultys A;Pikus S;Pozdzik E .Studies on thermoplastic polyurethanes based on new diphenylethane-derivative diols. I. Synthesis and characterization of nonsegmented polyurethanes from HDI and MDI[J].European Polymer Journal,2006(8):1786-1797.
[6] Lee MH;Choi HY;Jeong KY;Lee JW;Hwang TW;Kim BK .High performance UV cured polyurethane dispersion[J].Polymer Degradation and Stability,2007(9):1677-1681.
[7] Shaojun Chen;Jinlian Hu;Chun-wah Yuen;Laikuen Chan .Novel moisture-sensitive shape memory polyurethanes containingpyridine moieties[J].Polymer: The International Journal for the Science and Technology of Polymers,2009(19):4424-4428.
[8] Rogulska M;Kultys A;Podkoscielny W .Studies on thermoplastic polyurethanes based on new diphenylethane-derivative diols. II. Synthesis and characterization of segmented polyurethanes from HDI and MDI[J].European Polymer Journal,2007(4):1402-1414.
[9] 郭登银,王建龙.二氧化碳法制备六亚甲基二异氰酸酯的研究[J].涂料工业,2007(12):5-6,11.
[10] 王云芳,郭增昌,王汝敏.大二醇软链段混合比对聚氨酯弹性体的性能影响[J].中国胶粘剂,2008(06):15-18.
[11] 刘凉冰,庞坤玮,韩雪岗,刘红梅,虞莉萍.低模量聚醚型PU弹性体力学性能的研究[J].弹性体,2000(01):24-26.
[12] DAS Sudipto;YILGOR Iskender;YILGOR Emel et al.Structureeproperty relationships and melt rheology of segmented,non-chain extended polyureas:Effect of soft segment molecular weight[J].Polymer,2007,48:290-301.
[13] 吕志平,姚丽,毕晓霞,窦涛.多交联体系聚氨酯材料的制备与表征[J].高分子材料科学与工程,2008(09):147-150.
[14] 张春玲 .聚氨酯弹性体结构与性能的关系研究[D].北京化工大学,2004.
[15] 张海鹏;张崇耿;李强 等.三元乙丙橡胶绝热层老化性能试验研究[J].制造技术研究,2008,1:10-13.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%