通过热压缩试验研究了具有初始β转变组织的TC11钛合金在两相区800～980 ℃和应变速率0.001～0.1 s-1范围内的热变形行为和组织演变.分析了该合金在试验参数范围内变形的应力-应变曲线特征.动力学分析获得该合金在两相区变形的应力指数和变形激活能分别为4.42和490.8 kJ·mol-1,说明变形主要是位错的滑移和攀移过程.分析变形组织认为,片层组织的球化和弯折是两相区变形应力软化的原因.温度和应变速率严重影响片层组织球化过程的进行,980 ℃,0.001 s-1和0.01 s-1,以及950℃,0.001 s-1条件下变形有利于片层组织球化过程的充分进行.900～980 ℃,0.001～0.1 s-1球化过程中,变形到稳态的等轴α直径与温度补偿应变速率参数Z呈对数线性关系.
参考文献
| [1] | R.M.Miller;T.R.Bieler;S.L.Semiatin .FLOW SOFTENING DURING HOT WORKING OF Ti-6Al-4V WITH A LAMELLAR COLONY MICROSTRUCTURE[J].Scripta materialia,1999(12):1387-1393. |
| [2] | Semiatin SL;Weiss I;Seetharaman V .Flow behavior and globularization kinetics during hot working of Ti-6Al-4V with a colony alpha microstructure[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1999(2):257-271. |
| [3] | S. L. SEMIATIN;T. R. BIELER .THE EFFECT OF ALPHA PLATELET THICKNESS ON PLASTIC FLOW DURING HOT WORKING OF Ti-6Al-4V WITH A TRANSFORMED MICROSTRUCTURE[J].Acta materialia,2001(17):3565-3573. |
| [4] | Seshacharyulu T.;Medeiros SC.;Frazier WG.;Prasad YVRK. .Microstructural mechanisms during hot working of commercial grade Ti-6Al-4V with lamellar starting structure[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):112-125. |
| [5] | G.A. Salishchev;S.V. Zerebtsov;S.Yu. Mironov .Formation of Grain Boundary Misorientation Spectrum in Alpha-Beta Titanium Alloys with Lamellar Structure under Warm and Hot Working[J].Materials Science Forum,2004(Pt.1):501-506. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%