建立模拟激光冲击残余应力场的非线性弹塑性有限元模型,预测AISI 304奥氏体不锈钢厚、薄靶材经激光冲击后表面以及内部的残余应力场分布.模拟过程中,考虑材料高应变率(106s-1)下的力学性能和激光诱导冲击波的精确加载,分析激光功率密度、激光光斑尺寸、激光脉宽、激光冲击次数、激光单面与双面冲击等激光冲击参数以及初始残余应力等因素对不锈钢靶材残余应力分布的影响.数值模拟结果与X射线衍射法测量值吻合较好.在有初始残余拉应力(250MPa)存在的情况下,激光冲击仍能使304奥氏体不锈钢靶材形成残余压应力层,说明激光冲击工艺可提高奥氏体不锈钢焊接构件的抗应力腐蚀开裂能力.
参考文献
| [1] | 肖纪美.应力作用下的金属腐蚀[M].北京:化学工业出版社,1990 |
| [2] | 乔利杰;王燕斌;褚武扬.应力腐蚀机理[M].北京:科学出版社,1993 |
| [3] | 董俊明;潘希德;樊培丽 等.不锈钢焊接接头在MgCl2溶液中的应力腐蚀开裂研究[J].西安交通大学学报,1997,31(12):49-54. |
| [4] | YUJI SANO.Development and application of laser peening system to prevent stress corrosion cracking of reactor core shroud[A].New York:American Society of Mechanical Engineers,2000:191-200. |
| [5] | LLOYD A .Laser peening increases the corrosion resistance of metal[R].UCRL-TB-136126-01-09,America:Lawrence Livermore National Laboratory,2001. |
| [6] | 倪红芳,凌祥,彭薇薇.玻璃喷丸处理提高304不锈钢焊接接头抗应力腐蚀性能的研究[J].中国腐蚀与防护学报,2005(03):152-156. |
| [7] | PEYRE P;FABBRO R;MERRIEN P et al.Laser shock processing of aluminum alloys application to high cycle fatigue behavior[J].Materials Science and Engineering,1996,A210:102-113. |
| [8] | FAIRAND B P;CLAUER A H .Use of laser generated shocks to improvethe properties of metals and alloys[J].Industrial applications of high power laser technology,1976,86:112-119. |
| [9] | 任乃飞;杨继昌;张永康 等.激光冲击对金属材料机械性能的影响[J].激光技术,1998,22(04):235-238. |
| [10] | FAIRAND B P;CLAUER A H .Laser generation of high-amplitude stress waves in material[J].Journal of Applied Physics,1979,50(03):1497-1502. |
| [11] | CLAUER A H;KOUCKY J R .Laser shock processing increases the fatigue life of metal parts[J].Materials and Processing,1991,6:3-5. |
| [12] | ZHANG Y;ZANG S;ZANG X et al.Investigation of the surface qualities of laser shock processed zones and the effect on fatigue life of aluminum alloy[J].Surface and Coatings Technology,1997,92:104-109. |
| [13] | William Braisted;Robert Brockman .Finite element simulation of laser shock peening[J].International Journal of Fatigue,1999(7):719-724. |
| [14] | Abul Fazal M. Arif .Numerical prediction of plastic deformation and residual stresses induced by laser shock processing[J].Journal of Materials Processing Technology,2003(1/3):120-138. |
| [15] | 钱伟长.穿甲力学[M].北京:国防工业出版社,1984 |
| [16] | 余同希.塑性结构的动力学模型[M].北京:北京大学出版社,2002 |
| [17] | FABBRO R;FOURNIER J;BALLARD P et al.Physical study of laser induced plasma in confined geometry[J].Applications of Physics,1995,68(02):755-784. |
| [18] | 李晓轩,孙锡军,王华明,邹世坤,王健.奥氏体不锈钢1Cr18Ni9Ti激光冲击强化研究[J].宇航材料工艺,1999(04):16-19. |
| [19] | 倪红芳 .喷丸对不锈钢焊接接头应力腐蚀开裂影响的研究[D].南京工业大学,2004. |
| [20] | HIBBITT;KARLSSON;SORENSEN.ABAQUS User'S Manual Version 6.2[M].,2001 |
| [21] | PEYRE P;FABBRO R .Laser shock processing:a review of the physics and applications[J].Optical and Quantum Electronics,1995,27:1213-1229. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%