采用力学分析和有限元模拟对空心零件圆角部位在内高压成形过程中的应力分布和变形机理进行了分析,针对多边形截面空心件内高压成形,以矩形截面为例提出采用花瓣形预成形截面降低圆角成形压力的方法,分析了该方法降低圆角成形压力的机理,提出了花瓣形预成形截面形状关键参数计算公式,并通过试验进行了验证,为采用较低压力实现空心构件圆角内高压成形提供了理论指导.
参考文献
| [1] | DOHMANN F;HARTL C .Tube hydroforming--research and practical application[J].Journal of Materials Processing Technology,1997,71:174-186. |
| [2] | Muammer Koc;Taylan Altan .An overall review of the tube hydroforming (THF) technology[J].Journal of Materials Processing Technology,2001(3):384-393. |
| [3] | 苑世剑.内高压成形技术现状与发展趋势[J].金属成形工艺,2003(03):1-3. |
| [4] | HWANG Y M;SHR S F;Altan T .Analysis on tube hydroforming in a square cross-sectional die[J].Materials Science and Engineering,2000,279:71-80. |
| [5] | YUAN Shi-jian;LIU Gang;TIAN Xianwei et al.Numerical simulation and Experiments of hydroforming of rectangular-section Tubular Component[J].Journal of MST,2003,19(zk):35-37. |
| [6] | CHEN Kuo-kuang.Comparison of shell and solid models for corner fill in tube hydroforming[A].,2004:1083-1088. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%