为了探讨深冲IF钢再结晶织构与退火温度之间的关系及{111}再结晶织构形成机制,采用X射线衍射三维取向(ODF)和背散射电子衍射(EBSD)分析技术并结合金相组织观察,利用Gibbs-Thomson方程对冷轧IF钢在不同退火温度下的再结晶织构演变规律及形成机制进行研究.实验结果表明:随着退火温度的增加,再结晶量逐渐增多,γ纤维织构强度亦相应增强,同时,α纤维织构强度则逐渐降低;冷轧IF钢再结晶初期的织构转变主要发生在γ纤维织构之间.研究表明,再结晶核心的形成主要以"显微择优形核"为主,晶核的长大则主要以择优生长为主,而Σ重位点阵晶界在再结晶γ纤维织构形成过程中起着重要作用.
参考文献
| [1] | 赵骧;伊藤邦夫;吉永直树 .退火制度对高纯超低碳深冲钢板再结晶y织构的影响[J].钢铁,1996,31:39-43. |
| [2] | HAYAKAWA Y;SZPUNAR J A .Modeling of texture development during reerystallization of interstitial free steel[J].Acta Materialia,1997,45:2425-2434. |
| [3] | RAY R K;JONAS J J .Transformation texture in steels[J].ISIJ International,1994,34:927-942. |
| [4] | Lee SH.;Lee DN. .Shear rolling and recrystallization textures of interstitial-free steel sheet[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):84-90. |
| [5] | HE C S;ZHANG Y D;WANG Y N .Texture and microstmcture development in cold-rolled interstitial free (IF)steel sheet during electric field annealing[J].Scripta Materialia,2003,48:737-742. |
| [6] | HUTCHINSON B.Mierotextural studies of reerystallization[A].北京:万国学术出版社,1996:377-386. |
| [7] | 梁志德;徐家桢;王福.织构材料的三维取向分析术--ODF分析[M].沈阳:东北工学院出版社,1986 |
| [8] | B. L. Wu;Y. D. Wang;L. Zuo;Z. D. Liang;J. S. Lecomte;C. Esling .Development of the recrystallization texture in copper heated by laser beam[J].Scripta materialia,1998(1):13-17. |
| [9] | ZUO L;WATANABE T;ESLING C .A theory approach to grain boundary character distribution (GBCD) in textured polycrystalline materials[J].Zeitschrift Far Metallkande,1994,85:554-558. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%