电弧加热器流场特性是影响材料热化学烧蚀的关键因素之一,根据可压缩的轴对称N-S方程,对喷嘴的超声速自由射流、垂直冲击射流进行了数值模拟,采用k-ε湍流模型.计算得到自由射流流场结构的三个区域:射流核心区、射流卷吸区和射流湍流区,射流的速度分布具有不均匀性,其轴线射流速度存在较大变动;冲击射流近壁处存在着滞止区.所获得的喷嘴外部流场的流动状况以及冲击射流参数分布,如压力、温度和速度分布,可用于烧蚀试验和计算优化设计,流场计算结果与烧蚀实验值吻合.
参考文献
| [1] | M. Angioletti;R.M. Di Tommaso;E. Nino;G. Ruocco .Simultaneous visualization of flow field and evaluation of local heat transfer by transitional impinging jets[J].International Journal of Heat and Mass Transfer,2003(10):1703-1713. |
| [2] | Georges Duffa;Gerard L. Vignoles;Jean-Marc Goyheneche;Yvan Aspa .Ablation of carbon-based materials: Investigation of roughness set-up from heterogeneous reactions[J].International Journal of Heat and Mass Transfer,2005(16):3387-3401. |
| [3] | 王以飞,王晓放,黄钟岳,王德真.冷喷涂工艺中射流过程的数值模拟研究[J].表面技术,2003(01):28-30. |
| [4] | 杨燕勤,安志强,经树栋.喷射器流场的数值模拟研究[J].西南民族大学学报（自然科学版）,2006(02):316-323. |
| [5] | 何枫,姚朝晖,谢峻石.三维亚声速冲击射流流场的数值模拟[J].推进技术,2002(01):15-18. |
| [6] | 王臣,梁军,吴世平,杜善义.高温烧蚀条件下 C/C材料热力耦合场模拟[J].复合材料学报,2006(05):143-148. |
| [7] | 黄唐,毛国良,姜贵庆,周伟江.二维流场、热、结构一体化数值模拟[J].空气动力学学报,2000(01):115-119. |
| [8] | COOPER D;JACKSON D C;LAUNDER B E .Impinging jet studies for turbulence model assessment.flow field experiments[J].International Journal of Heat and Mass Transfer,1993,36(10):2675-2684. |
| [9] | Smith LM.;Woodruff SL. .Renormalization-group analysis of turbulence [Review][J].Annual Review of Fluid Mechanics,1998(0):275-310. |
| [10] | Earl A Thomton;Ken Morgan .Application of Integrated Fluid--Thermal-Structural Analysis Methods[ICAS28822.3.3][R]. |
| [11] | E A Thomton .Element Prediction of AerothermalStructure Interaction of Aerodynamically Heated Panels[AIAA 87-1610][R]. |
| [12] | Kelkar M.;Heberlein J. .Wire-arc spray Modeling[J].Plasma Chemistry and Plasma Processing,2002(1):1-25. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%